|
1458 | QCAD (main) | Bug Report | Low | Draw > Polyline > From Segments: empty polyline created ... | Closed | |
|
Task Description
- Create four arc segments representing a full circle - Create polyline from segments
Empty polyline is created (caused by simplification).
|
|
1239 | QCAD (main) | Bug Report | Low | Draw > Polyline > Create from Segments: fails with arc ... | Closed | |
|
Task Description
In some cases, loose arc segments result in errors. See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3573
|
|
1121 | QCAD (main) | Bug Report | Medium | Draw > Polyline > Append Node(s) broken | Closed | |
|
Task Description
Selecting the polyline is not possible. Possibly related to update of DrawPolyline tool.
|
|
1778 | QCAD (main) | Bug Report | High | Draw > Point > Single Point: Exception | Closed | |
|
Task Description
Exception due to invalid include path.
|
|
1666 | QCAD (main) | Feature Request | Low | Draw > Line > Relative Angle / Orthogonal: define lengt... | Assigned | |
|
Task Description
Add option to define length (end point) using mouse pointer.
If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205
|
|
1540 | QCAD (main) | Bug Report | Low | Draw > Line > Parallel: Changing back to Auto has no ef ... | Closed | |
|
Task Description
Draw > Line > Parallel - switch type to Line, XLine or Ray - switch back to Auto - Parallel is always line segment
|
|
1736 | QCAD (main) | Bug Report | Medium | Draw > Image: broken | Closed | |
|
Task Description
Draw > Image broken due to UI file resource not being found.
|
|
1309 | QCAD (main) | Bug Report | Low | Draw > Hatch: cannot create hatch from boundary in bloc ... | Closed | |
|
Task Description
- Draw boundary (e.g. rectangle) - Create block from boundary - Select block reference - Draw > Hatch
|
|
1408 | QCAD (main) | Bug Report | Low | Draw > Hatch: arc boundaries rendering errors | Closed | |
|
Task Description
Hatch boundaries containing arcs with large radii are rendered imprecisely. See also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=4139
|
|
1523 | QCAD (main) | Bug Report | Low | Draw > Hatch > Hatch from Segments: fails for circle in ... | Closed | |
|
Task Description
- Draw circle inside other circle - Draw > Hatch > Hatch from Segments - Click both circles - Right-click
|
|
2270 | QCAD (main) | Bug Report | Low | Draw > Dimension > Ordinate: Ordinate dimension values ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8708
Caused by missing linear scale property of ordinate dimensions.
|
|
2032 | QCAD (main) | Bug Report | Low | Draw > Circle > Three Tangents: Cannot select third tan ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6915
|
|
1476 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Radius: exception with a ... | Closed | |
|
Task Description
Draw > Circle > 2 Tangents and Radius Choose two arcs or two circles as tangential entities.
|
|
2285 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Point: fails for Circle, ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8773
|
|
2286 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Point: fails for Circle, ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8773
|
|
1456 | QCAD (main) | Bug Report | Low | Drag and drop: requires two clicks with auto snap | Closed | |
|
Task Description
Drag and drop requires two clicks with auto snap if grid snap and free snap are disabled for auto snap. - Edit > Application Preferences > Snap > Auto Snap: disable grid and free - Drag an entity and try to position it - First click does nothing, second click positions entity
|
|
453 | QCAD (main) | Bug Report | Low | Draft mode: GUI action state not updated when switching ... | Closed | |
|
Task Description
create two new drawings
switch to tab 1
enable draft mode
switch to tab 2
⇒ draft mode button / menu still on (should be off)
|
|
2053 | QCAD (main) | Bug Report | Low | Dots in line patterns not visible at extreme coordinate ... | Closed | |
|
Task Description
Dots in line patterns are not displayed / printed at extreme coordinates.
See also: https://qcad.org/rsforum/viewtopic.php?f=89&t=7053
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
482 | QCAD (main) | Feature Request | Low | Disproportionate scaling of blocks | Closed | |
|
Task Description
Block with hatch scaled with factor in X different from factor in Y leads to problems if contour contains arcs (which cannot / are not scaled disproportionally).
|
|
622 | QCAD (main) | Feature Request | Low | Disproportianal scaling of arcs, ellipses | Assigned | |
|
Task Description
Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.
|
|
2518 | QCAD (main) | Bug Report | Low | Display error when using selection box or info tools | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10563 https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10567
|
|
231 | QCAD (main) | Feature Request | Low | Disable grid snap for auto snapping | Closed | |
2 |
Task Description
Disable grid snap for auto snapping or otherwise configurable auto snap.
|
|
1401 | QCAD (main) | Bug Report | Low | Direct distance entry broken | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4078
|
|
1484 | QCAD (main) | Feature Request | Low | Dimensions: optionally use comma instead of dot | Closed | |
1 |
Task Description
Use comma to display dimension labels.
|
|
1116 | QCAD (main) | Bug Report | Low | Dimensions: linear factor reset to drawing default | Closed | |
|
Task Description
Linear factor of dimensions is reset to drawing default (DIMLFAC) if set to 1, even if drawing default is not 1 on saving.
|
|
348 | QCAD (main) | Feature Request | Low | Dimensions: Inch / Architectural: supporess 0 feet | Closed | |
|
Task Description
Dimensions: Inch / Architectural: supporess 0 feet
|
|
2523 | QCAD (main) | Bug Report | Low | Dimensions: Context menu of text label edit: <> entry | Closed | |
|
Task Description
Context menu of dimension text label line edit widgets offers a <> entry which does not insert <>.
|
|
242 | QCAD (main) | Bug Report | Low | Dimension: no feet displayed in architectural format | Closed | |
|
Task Description
Dimension: no feet displayed in architectural format
(e.g. 79 19/32 instead 72 7 19/32)
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1605
|
|
379 | QCAD (main) | Bug Report | Low | Dimension: move label when label is beside dimension li ... | Closed | |
|
Task Description
Dimension: moving label when label is beside dimension line not possible with drag and drop.
|
|
1417 | QCAD (main) | Bug Report | Very Low | Dimension: missing tolerance icons in options toolbar | Closed | |
|
Task Description
e.g. Dimension > Horizontal: tolerance inputs should have an icon next to them.
|
|
2230 | QCAD (main) | Bug Report | Low | Dimension: CAD font label displayed with wrong lineweig ... | Closed | |
|
Task Description
Application Preferences: Edit > Application Preferences > Graphics View > Text Rendering: Render text as paths
Drawing Preferences: Edit > Drawing Preferences > Dimensions > Dimension Settings > Label font: Standard (or other CAD font) Edit > Drawing Preferences > Dimensions > Dimension Settings > Label color: By Layer (or fixed color)
|
|
1416 | QCAD (main) | Bug Report | Low | Dimension value for drawing unit feet | Closed | |
|
Task Description
If the drawing unit is set to ‘feet’ and the dimension format is ‘architectural’ or ‘engineering’, the drawing unit should be implicitly regarded as inch for the purpose of calculating dimension values. Since QCAD uses the drawing unit, the dimension values are off by a factor of 12 when importing drawings from other products.
|
|
901 | QCAD (main) | Feature Request | Low | Dimension text styles | Assigned | |
|
Task Description
Support custom dimension text styles for imported DXF / DWG files.
|
|
159 | QCAD (main) | Bug Report | Low | Dimension text labels | Closed | |
|
Task Description
“” → default label “.” → no label
|
|
1656 | QCAD (main) | Bug Report | Low | Dimension size scale wrong in viewports | Closed | |
|
Task Description
Dimensions in viewports do not reflect the configured Edit > Application Preferences > Dimension > Dimension Settings > Size scale factor if value != 1.
|
|
1578 | QCAD (main) | Bug Report | Low | Dimension scales with linear factors change after savin ... | Closed | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=107&t=4593&p=17839#p17835
|
|
243 | QCAD (main) | Bug Report | Low | Dimension preferences: precision not saved | Closed | |
|
Task Description
Dimension preferences: precision not saved between preference dialog sessions.
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1605
|
|
165 | QCAD (main) | Bug Report | Low | dimension arrows / draft mode | Closed | |
|
Task Description
dimension arrows not visible in draft mode
|
|
2524 | QCAD (main) | Bug Report | Low | Dimension > Reset Label Position: broken under macOS M1 ... | Closed | |
|
Task Description
Label position is only reset on reload / entity regeneration.
|
|
1280 | QCAD (main) | Bug Report | High | Dimension > Leader: crash when attempting to draw leade ... | Closed | |
|
Task Description
- Create new empty drawing - Make layer 0 invisible or lock it - Dimension > Leader - Set start point
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
2109 | QCAD (main) | Bug Report | Low | Dimension > Arc Length: Tool non-responsive | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7542
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
4 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
176 | QCAD (main) | Feature Request | Low | Demo Version | Closed | |
|
Task Description
Save drawings on exit
10min time limit
markers in
|
|
268 | QCAD (main) | Feature Request | Low | Define grid origin | Closed | |
|
Task Description
Define grid origin
|
|
364 | QCAD (main) | Bug Report | Low | Default paper with default unit inch | Closed | |
|
Task Description
Default paper might be configured as 210×297 inches if inch is chosen as default unit.
|
|
578 | QCAD (main) | Feature Request | Low | Default line weight for new layers | Closed | |
|
Task Description
I couldn’t find where to specify the default “Line weight” for a newly created layer. Default proposed is 0,25 mm ISO and I would like to continue to uses 0,00 mm. Because, these lines are very thick when i look at my drawing in
|
|
2118 | QCAD (main) | Bug Report | Low | Dark mode: disabled menu text distorted | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7596
Windows / Linux
|
|
928 | QCAD (main) | Task | Low | CXF font editing | Closed | |
1 |
Task Description
Port CXF font editor to QCAD 3. - Load CXF fonts (load glyphs into blocks) - Save back to CXF format
|