|
750 | QCAD (main) | Bug Report | Low | Modify - Divide: entities moved to current layer | Closed | |
|
Task Description
Modify divide moves split entities to new layer if circle or full ellipse is divided.
|
|
771 | QCAD (main) | Bug Report | Low | Isometric grid: spacing not updated | Closed | |
|
Task Description
The spacing of the isometric grid is not updated correctly, if the grid spacing is not set to ‘auto’ but fixed values and the isometric grid is switched on using the menu or tool bars: - Set grid to orthogonal grid, spacing fixed: 1/1 - Set meta grid to orthogonal grid, spacing fixed: 10/10 - Switch to isometric grid using menu or tool bar buttons
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
777 | QCAD (main) | Bug Report | Low | Spline display error | Closed | |
|
Task Description
Splines produced by Illustrator are not correctly imported or displayed.
See: http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2344
|
|
793 | QCAD (main) | Bug Report | Low | Wacom Intuos tablet with mouse not working | Closed | |
|
Task Description
Intuos Mouse (moving around on the Intuos Tablet)
does work for drawing and marking with the left button on the drawing area
does work for zooming in and out with the middle-button wheel
does work for calling up context menus with the right button on the menu bar and the layer list window
does not work with the left button for actually clicking any menu item (Edit, View, ..) nor action icon on the top nor the left (e.g., draw lines, measure, zoom, undo, save, ..) nor the layer window (e.g., toggle visible, lock layer) nor the property editor.
Wacom mouse model: ZC-100-01 win7-64 sp1
|
|
809 | QCAD (main) | Bug Report | Low | Hatch modifications and undo | Closed | |
1 |
Task Description
- Draw ellipse - Fill ellipse (solid or hatch) - Rotate ellipse and filling - Undo
→ Angle of ellipse shaped fill is not undone.
Other hatch boundary elements that break or cannot be undone: - splines from fit points - arcs (when only one point is moved, e.g. stretch) - circles (when radius changes, e.g. scale, position changes) - ellipses (when major point changes)
|
|
850 | QCAD (main) | Bug Report | Low | Splines not selectable | Closed | |
|
Task Description
Imported splines which typically represent lines, circles or arcs (explicit knot vector given) are sometimes wrongly identified as invalid by the OpenNURBS library. This results in splines that are loaded and displayed correctly but are not selectable.
|
|
851 | QCAD (main) | Bug Report | Low | Wrong font name in DXF files created with dxflib 3.1 | Closed | |
|
Task Description
dxflib 3.1 saves the text style name as style font in text styles.
|
|
871 | QCAD (main) | Bug Report | Low | Incompatible text line feeds | Closed | |
|
Task Description
Editing text in QCAD leads to line feeds that are incompatible with some other products (\p instead of \P).
|
|
903 | QCAD (main) | Bug Report | Low | Cannot read POLYLINE / VERTEX entities from DXF | Closed | |
|
Task Description
Polylines that are stored with vertices as separate entities in DXF are not read by QCAD. See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=2531
|
|
906 | QCAD (main) | Bug Report | Low | Stretch: not working for hatch entities | Closed | |
|
Task Description
Stretching hatch entities results in broken hatches. Regression introduced in QCAD 3.1.5, bug still present in 3.2.2.
|
|
909 | QCAD (main) | Bug Report | Low | Moving paper in print preview: does not terminate | Closed | |
|
Task Description
Action to move paper in print preview does not properly terminate on right-click (paper can still be moved after right-click)
|
|
910 | QCAD (main) | Bug Report | Low | Exploding block with attribute | Closed | |
|
Task Description
Exploding a block with attributes results in wrong exploded text (tag instead of value).
|
|
911 | QCAD (main) | Bug Report | Low | Saving / loading text with accents ('é') | Closed | |
|
Task Description
Text with é turns into È.
|
|
912 | QCAD (main) | Bug Report | Low | Move to back has no effect on hatches / solid fills | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=2548
|
|
913 | QCAD (main) | Bug Report | Low | Library browser: SVG items show no icon / cannot be ins ... | Closed | |
|
Task Description
SVG import fails if no resolution is specified for SVGImporter.
|
|
915 | QCAD (main) | Bug Report | Low | Texts with undefined characters | Closed | |
|
Task Description
Texts in CAD fonts with characters for which no glyph is defined report a wrong bounding box which always includes the absolute zero point. This makes the spatial index ineffective for drawings containing many such texts (typically complex drawings from international users).
|
|
919 | QCAD (main) | Bug Report | Low | Insert block with attributes: third attribute input not ... | Closed | |
|
Task Description
Insert block with attributes: third attribute input not working
|
|
921 | QCAD (main) | Bug Report | Low | File - Save As: chosen file type filter ignored under K ... | Closed | |
|
Task Description
This affects only certain KDE installations: - Fedora 12 with KDE - Kubuntu 13.04
|
|
924 | QCAD (main) | Bug Report | Low | Printing under Linux: printing continues after cancelli ... | Closed | |
|
Task Description
Once the print dialog is displayed, it will print even if I “cancel” or “x” the page.
|
|
929 | QCAD (main) | Bug Report | Low | Modify - Scale: Proportional scaling has no effect | Closed | |
|
Task Description
If the keep proportions button is checked in the scale dialog, no scaling is performed.
|
|
931 | QCAD (main) | Bug Report | Low | Insert block with attributes from library: unit scale p ... | Closed | |
|
Task Description
Inserting a block with attributes into a drawing with a different unit results in wrongly scaled attribute entities.
Workaround: Sync block attributes after insert.
|
|
932 | QCAD (main) | Bug Report | Low | Library item with attribute definitions: attributes cre ... | Closed | |
|
Task Description
Inserting part library items with attributes definitions can result in attributes being created with invalid layer IDs (from the source document but invalid in the target document).
|
|
933 | QCAD (main) | Bug Report | Low | Modify - Break out Segment: fails for special case of e ... | Closed | |
|
Task Description
If the segment of an ellipse is limited by another ellipse with the same ratio and rotation, the break out tool cannot find the correct intersection to break out to.
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2586&view=unread#unread
|
|
938 | QCAD (main) | Bug Report | Low | QCAD Community Edition: may not be able to print on som ... | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2595
|
|
955 | QCAD (main) | Bug Report | Low | File - PDF Export: large file size | Closed | |
|
Task Description
Arcs and circles are exported with too many segments if the drawing scale is below 1.0 (e.g. 1:100).
|
|
956 | QCAD (main) | Bug Report | Low | Screen based linetypes: splines, texts, dimensions | Closed | |
|
Task Description
Screen based linetypes not working for splines, texts (CAD fonts) and dimension arrows.
|
|
957 | QCAD (main) | Bug Report | Low | Property editor: custom property with title 'Z' not dis ... | Closed | |
|
Task Description
Properties with title ‘Z’ are not displayed in the property editor. This is correct but should not apply to custom, user defined properties.
|
|
958 | QCAD/CAM | Bug Report | Low | CAM Export: points not exported | Closed | |
|
Task Description
Points are not being exported.
|
|
965 | QCAD (main) | Bug Report | Low | Modify - reverse: fails for imported splines | Closed | |
|
Task Description
See forum at: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2640&view=unread#unread
Splines affected are 2nd degree with >4 control points, 3rd degree with >5 control points when loaded with knot vector from DXF. Newly constructed splines with automatically generated knot vector work fine.
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|
|
977 | QCAD (main) | Bug Report | Low | Modify - Clip to Rectangle: fails if chosen area contai ... | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2681&view=unread#unread
|
|
982 | QCAD (main) | Bug Report | Low | Selection filter: selects entities on hidden layers | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=34&t=2690
|
|
985 | QCAD (main) | Bug Report | Low | Selection filter: layers / blocks not updated | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2694
|
|
989 | QCAD (main) | Bug Report | Low | File - Save As: suggested file name cut off after first ... | Closed | |
|
Task Description
Example: file name: “my.file.dxf” File - Save As suggests file name: “my.dxf”
|
|
1010 | QCAD (main) | Bug Report | Low | Property editor: selection filter combobox looses choic ... | Closed | |
|
Task Description
Select line and arc
Set selection filter in property editor to ‘lines’
Selection filter combo no longer contains choice for ‘arcs’.
|
|
1014 | QCAD (main) | Bug Report | Low | Spline shape changes in DXF/DWG file when saved after m ... | Closed | |
|
Task Description
Draw Spline from fit points
Mirror spline
Save as DXF/DWG
Load into 3rd party application
spline shape changed
Reconstructing the mirrored spline from scratch maybe used as a workaround.
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2754
|
|
1016 | QCAD (main) | Bug Report | Low | Community Edition: dxflib based import: import of block ... | Closed | |
|
Task Description
If the order of blocks in a DXF R12 file is: - block 1 - block 2 And ‘block 1’ references ‘block 2’, the import fails since ‘block 2’ is not defined at the time ‘block 1’ is imported.
|
|
1033 | QCAD (main) | Bug Report | Low | QCAD Community Edition: cannot edit properties of block ... | Closed | |
|
Task Description
See forum thread at: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2833
|
|
1041 | QCAD (main) | Bug Report | Low | Zoom to selection: invalid view if only one point is se ... | Closed | |
|
Task Description
- Select one single point - Zoom to selection
|
|
1045 | QCAD (main) | Bug Report | Low | Info > Distance ...: ticks are not using correct spacin ... | Closed | |
|
Task Description
Tick spacing is based on fractions for metric units.
|
|
1048 | QCAD (main) | Bug Report | Low | Support "ByBlock" for block attributes | Closed | |
|
Task Description
E.g. if a block reference has its color set to ‘red’ and the block reference has an attribute with color=’ByBlock’, the attribute should be displayed in red.
|
|
1059 | QCAD (main) | Bug Report | Low | Command line tools: log file permissions | Closed | |
|
Task Description
Command line tools may not have permissions to create bat_log. Windows error:
Access is denied. The system cannot find the file specified. Could Not Find C:\Program Files (x86)\<tool>\bat_log
|
|
1060 | QCAD (main) | Bug Report | Low | Property editor: read only text entity property editabl ... | Closed | |
|
Task Description
|
|
1064 | QCAD (main) | Bug Report | Low | Text editor: handling of non-breaking space (\~, ... | Closed | |
|
Task Description
- Create text with non-breaking space (\~) - Edit text - Text displayed with - Click OK - Text in drawing displayed with
|
|
1073 | QCAD (main) | Bug Report | Low | Duplicate images with same path not saved | Closed | |
|
Task Description
Only affects files saved through dxflib.
|
|
1074 | QCAD (main) | Bug Report | Low | Application Preferences: dimension font | Closed | |
|
Task Description
Dimension font setting as default for new drawings has no effect.
|
|
1075 | QCAD (main) | Bug Report | Low | dwg2svg: include path broken | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2997
|
|
1078 | QCAD (main) | Bug Report | Low | Break out segment: break out last segment of ray / xlin ... | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3005
|
|
1082 | QCAD (main) | Bug Report | Low | Leaders: Arrow size does not respect dimension size sca ... | Closed | |
|
Task Description
Arrow size does not respect dimension size scale factor
|