|
341 | QCAD (main) | Bug Report | Medium | PrintPreview: Auto Fit Pages doesn't work as excepted | Closed | |
|
Task Description
load attached drawing
print preview
auto fit pages
shows 2 columns (wrong) and 13 rows (correct), see attachment
|
|
340 | QCAD (main) | Bug Report | Medium | Bitmap export shows selected entities | Closed | |
|
Task Description
|
|
339 | QCAD (main) | Bug Report | Medium | PrintPreview: multi page widget doesn't work anymore | Closed | |
|
Task Description
|
|
338 | QCAD (main) | Bug Report | Medium | PDF export generates an empty document | Closed | |
|
Task Description
→ generates an empty document (or maybe both the lines and the background is white)
Note: After the export ones stays in print preview mode, which is a bit confusing if the command was invoked from the “normal” drawing mode.
|
|
337 | QCAD (main) | Bug Report | Medium | Polylines with arcs export to SVG as lines | Closed | |
|
Task Description
If I create a closed polygon that include arcs or parts of circles, they export to SVG as straight lines.
If I explode the polyline, they export fine.
If I create a solid fill, those arcs export fine.
See attached DXF and SVG output.
This may be a duplicate bug, but my previous bug report vanished.
|
|
334 | QCAD (main) | Bug Report | Medium | SVG Export Polygons, arcs converted to straight lines. | Closed | |
|
Task Description
When exporting a drawing to SVG, polygons containing arcs (trimmed circles in this case) are converted to straight lines. If the polygon is exploded first, then it exports correctly. Of course, this isn’t useful if closed polygons are required for the program using the SVG file. Solid hatch fills export correctly. See attached DXF and corresponding SVG export.
|
|
319 | QCAD (main) | Bug Report | Medium | Prints as though A4 even though I change paper size in ... | Closed | |
|
Task Description
This continues a problem that occurred in Qcad 2.2/OpenSuse 11.1:
1. The default paper size is always A4. (minor, but annoying)
2. Here is the serious problem: When I change the paper size to, for example tabloid, in File/Drawing Preferences/Page and in Print/Properties, the print job prints as though it were A4. This occurs unless I first go to Yast or Control Center and (as superuser) change the default page size. Other programs (such as Open Office) don’t require this.
The printer is an HP deskjet 9800, and the problem occurs with either CUPS or hplip printing.
I am using Opensuse 11.3 (I haven’t been able to install successfully opensuse 11.4 on my computer), Qcad Version: 3.0 Beta 2 Date: Sep 17 2011 Qt Version: 4.7.3 Edition: Full Version
|
|
312 | QCAD (main) | Bug Report | Medium | Crash | Closed | |
|
Task Description
Pendant la création d’un plan le logiciel se bloque, puis une boite de dialogue Windows apparait : “QCAD a cessé de fonctionner”. Après validation de la fenêtre le logiciel se ferme et toutes les modifications non enregistrées sont perdues.
When creating a plan software hang, then a dialog window appears: “QCad has stopped working”. After validation of the software window is closed and all unsaved changes are lost.
|
|
311 | QCAD (main) | Bug Report | Medium | Layer locking | Closed | |
|
Task Description
Pendant la réalisation d’un plan le calque 0 s’est verrouillé, impossible de le modifier. En l’enregistrant sous un autre nom le calque 0 est toujours verrouillé.
During the implementation of a plan the layer 0 was locked, impossible to change it. By saving it under another name Layer 0 is always locked.
|
|
306 | QCAD (main) | Bug Report | Medium | Grid can`t be turned off | Closed | |
|
Task Description
Not possible to turn off grid (in application preferencies). In settings looks that accepted (checkbox is unchecked) but in program window is still visible.
|
|
304 | QCAD (main) | Feature Request | Medium | invalid hatch area hint | Closed | |
|
Task Description
Trying to build a hatch area sometimes results in “invalid hatch area”. It would be nice if QCAD could give a hint why / where the problem occurs (where is “line too long” or “not closed”).
|
|
301 | QCAD (main) | Bug Report | Medium | Open an existing DXF file | Closed | |
|
Task Description
When I open a dfx file I have made from AutoCad, QC will open the file fine but then when I try to save it I get a dialog box stating that the drawing was not saved and asks if I have permission or is the disk full. Yes, I have permission and no the disk is not full. Then when I close the dfx file and try to reopen it the second time, QC will not open the file and a dialog box reads “Cannot open file, please check your access rights, the file format and the file extension”
|
|
298 | QCAD (main) | Bug Report | Medium | Elements of a hidden layer are deleted after saving and ... | Closed | |
|
Task Description
All drawing elements belonging to a layer are not existing anymore after:
the layer has been made invisible (unselect the eye symbol of the layer),
the drawing has been saved,
the drawing has been closed
and finally the drawing is reopened.
This behavior has been observed on the following OSes:
Windows XP SP3
Ubuntu 11.04
|
|
284 | QCAD (main) | Bug Report | Medium | Line Spacing Factor get lost in saved documents | Closed | |
|
Task Description
When I open a saved document, the “Line Spacing Factor” it return to 1.
Tried several times, same result.
Carlo Couvert
|
|
279 | QCAD (main) | Bug Report | Medium | library.js:638: Error: cannot access member `children' ... | Closed | |
|
Task Description
""
Uncaught exception at /home/martin/workspace/rsframework/scripts/library.js:638:
Error: cannot access member `children' of deleted QObject
638 if (!isNull(child.children) && child.children().length != 0) {
qsdb> child
Error: cannot access member `toString' of deleted QObject
qsdb> isNull(child)
true
qsdb> .bt
#0 getWidgets(widget = QToolBar) at /home/martin/workspace/rsframework/scripts/library.js:638
#1 <anonymous>(resume = true) at scripts/File/PrintPreview/PrintPreview.js:235
#2 <anonymous>() at /home/martin/workspace/rsframework/scripts/Idle/../EAction.js:237
#3 <anonymous>() at /home/martin/workspace/rsframework/scripts/File/
PrintPreview/../../Idle/DefaultAction/DefaultAction.js:119
#4 <global>() at -1
|
|
264 | QCAD (main) | Feature Request | Medium | Support for "Layouts" (paper space, viewport) | Closed | |
24 |
Task Description
There is one important ACAD feature that I would really like to see supported in QCAD3 and that is “Layouts”
Looking at the block lists, it seems to me that it can’t be too much extra work to support it, since the model space and different paper spaces are already shown there - and one can edit it.
QCAD draws infinitely easier than ACAD and drawing layouts is a primary feature of ACAD. With this in QCAD I can hardly see why anyone that does 2D work would need ACAD at all.
|
|
260 | QCAD (main) | Feature Request | Medium | Reference dimensioning | Closed | |
8 |
Task Description
Reference dimensioning (baseline dimensioning)
Create multiple dimensions using the same base line.
|
|
259 | QCAD (main) | Feature Request | Medium | Chain dimensions | Closed | |
10 |
Task Description
Chain dimensions
|
|
258 | QCAD (main) | Bug Report | Medium | RDwgExporter.cpp#190 | Closed | |
|
Task Description
Debug: "RDwgServices::printErrorStackTrace: Requires an integer between 1 and 6."
Fatal: ASSERT: "false" in file RDwgExporter.cpp, line 190
./qcad: line 3: 24327 Aborted LD_LIBRARY_PATH=. ./qcad-bin $@
|
|
252 | QCAD (main) | Bug Report | Medium | Displayed line thickness too thick. | Closed | |
|
Task Description
This manifestation happened after I had loaded an existing drawing, made modifications, then used print preview and adjusted the scale to fit the paper.
The file was closed. Upon reopening lines designated as .25mm were unusually thick such that two lines 2mm apart appeared as one solid line. Placing the cursor over the line showed it was comprised of two lines.
Changing the properties of a line to make it thinner did not help with one exception and that was to set the line thickness to default, when the two lines became visible.
|
|
251 | QCAD (main) | Bug Report | Medium | wrong tab names | Closed | |
|
Task Description
After I open the second file, the tab name of the first file is changed to the name of second file. After that I see two tabs with the same names but with two different files.
|
|
239 | QCAD (main) | Bug Report | Medium | part library unit conversion | Closed | |
|
Task Description
|
|
237 | QCAD (main) | Bug Report | Medium | Image remains displayed when it's layer is changed to h ... | Closed | |
|
Task Description
Ubuntu 11.04 64 bit. Image imported into drawing in layer ‘pictures’. Layer ‘pictures’ hidden.
QCAD 3 beta displays the image when zoomed out so that the whole drawing is visible within the working window. It ‘disappears’ when the zoom is taken in such that the drawing exceeds the window display.
When the layer ‘pictures’ is visible the image behaves as expected, i.e. always visible.
|
|
236 | QCAD (main) | Feature Request | Medium | trial version: teaser dock showing a small web page | Closed | |
|
Task Description
|
|
216 | QCAD (main) | Bug Report | Medium | CTRL + Left Mouse doesn't work | Closed | |
|
Task Description
CTRL + left mouse button does not add to current selection
|
|
199 | QCAD (main) | Bug Report | Medium | Print preview scaling distorts model view | Closed | |
|
Task Description
- Draw a rectangle, say 100 x 100 (I use mm unit, but does it matter?) 1 - Turn on print preview - Turn off print preview - OK 2 - Turn on print preview - Set scale 1/10 - Lines are thicker now, this is good - Turn off print previw - Lines stay thick in model view, should that be so? 3 - Set layer 0 to use dash as line-style - Turn on print preview - Looks OK - Set scale 1/10 - Dashes hardly visible, looks almost like a continuous line
In the end of 2,3 a way to reset line width display in model view is to cancel scaling in print preview, ie. turn on print preview, set scale 1:1. I suppose this is a regression since TP1: model view always is unscaled.
The line-width scaling is quite accurate now: Draw two lines 10 mm apart. Set line-width 0.5mm. Set scale 1:20 and the lines exactly touch.
|
|
186 | QCAD (main) | Bug Report | Medium | QCAD not working on Ubuntu 11.04 x64 | Closed | |
|
Task Description
Qcad Beta in Ubuntu 11.04 x64
'/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant'
/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/assistant: error while loading shared libraries: libQtHelp.so.4: cannot open shared object file: No such file or directory
gabriel@gabriel-Studio-1558:~$ '/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/qcad-trial'
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so
(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so
(<unknown>:4849): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): Gtk-WARNING **: Loading IM context type 'ibus' failed
application directory: "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux"
working path: "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux"
library path: "/home/gabriel/opt/qcad-3.0.0-beta-trial-linux/plugins"
Debug: Init script plugins...
Debug: TIMER: 26623 ms - "loading and initializing plugins"
Warning: RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script:
"scripts/File/NewFile/NewFile.js"
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: Creating storage...
Debug: Creating spatial index...
Debug: Creating document...
Debug: Creating MDI child...
Debug: Initialize Viewports...
Debug: Init graphics view...
Debug: Init scrollbars...
Debug: Init rulers...
Debug: Init idle and default actions...
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
Debug: lock failed: "EACTION FINISH: scripts/Snap/Auto/Auto.js"
Debug: locker: "NEW"
Debug: lock failed: "EACTION RESUME: scripts/Idle/Reset/Reset.js"
Debug: locker: "NEW"
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
Debug: lock failed: "EACTION FINISH: scripts/Snap/RestrictOff/RestrictOff.js"
Debug: locker: "NEW"
Debug: lock failed: "EACTION RESUME: scripts/Idle/Reset/Reset.js"
Debug: locker: "NEW"
Debug: Show MDI child...
Debug: lock failed: "RMainWindowQt::subWindowActivated"
Debug: locker: "NEW"
Debug: Init event handler...
Debug: updateScenes...
Debug: updateGuiActions...
Debug: notifyListenersSlot...
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
Debug: setActiveSubwindow...
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
Warning: QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug: RDocumentInterface::deleteTerminatedActions: mutex lock failed
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
(<unknown>:4849): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64
(<unknown>:4849): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
** (<unknown>:4849): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed
(<unknown>:4849): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed
(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed
(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed
(<unknown>:4849): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
|
|
184 | QCAD (main) | Bug Report | Medium | SIGABRT RExporter::exportEntity() at RExporter.cpp:524 | Closed | |
|
Task Description
/home/martin/workspace/rsframework/debug/qcad-bin [24765]
Thread [10] 24804 (Suspended : Container)
__kernel_vsyscall() at 0xffffe424
poll() at 0xb4f9703e
g_poll() at 0xb4b010bb
0xb4af0c46
g_main_context_iteration() at 0xb4af0fce
QEventDispatcherGlib::processEvents() at 0xb54a2741
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QThread::exec() at 0xb535e8ed
0xb544da4b
<...more frames...>
Thread [7] 24773 (Suspended : Container)
Thread [6] 24772 (Suspended : Container)
Thread [5] 24771 (Suspended : Container)
Thread [3] 24769 (Suspended : Container)
Thread [2] 24768 (Suspended : Container)
Thread [1] 24765 (Suspended : Signal : SIGABRT:Aborted)
__kernel_vsyscall() at 0xffffe424
raise() at 0xb4ef98df
abort() at 0xb4efb220
RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8f1cb62
qt_message_output() at 0xb5356f65
0xb53571ab
qFatal() at 0xb53572c9
qt_assert() at 0xb5357355
RExporter::exportEntity() at RExporter.cpp:524 0x8eff312
RExporter::exportEntity() at RExporter.cpp:578 0x8eff500
RExporter::exportEntities() at RExporter.cpp:642 0x8eff6d5
RGraphicsScene::regenerate() at RGraphicsScene.cpp:111 0x8f07c6b
RDocumentInterface::regenerateScenes() at RDocumentInterface.cpp:534 0x8ef0979
RDocumentInterface::objectChangeEvent() at RDocumentInterface.cpp:2,053 0x8ef4986
RDocumentInterface::applyOperation() at RDocumentInterface.cpp:1,911 0x8ef445e
REcmaDocumentInterface::applyOperation() at REcmaDocumentInterface.cpp:5,708 0x88ecfae
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa4b828e1
0xb6a423e3
0xb6af06e0
0xb6ac201e
QScriptValue::call() at 0xb6bd2e67
REcmaShellActionAdapter::coordinateEvent() at REcmaShellActionAdapter.cpp:1,279 0x8c5e96a
RDocumentInterface::handleClickEvent() at RDocumentInterface.cpp:729 0x8ef12c3
RDocumentInterface::mouseReleaseEvent() at RDocumentInterface.cpp:652 0x8ef0eac
RGraphicsScene::handleMouseReleaseEvent() at RGraphicsScene.cpp:174 0x8f07fa7
RGraphicsView::handleMouseReleaseEvent() at RGraphicsView.cpp:468 0x8f0a9d7
RGraphicsViewQt::mouseReleaseEvent() at RGraphicsViewQt.cpp:253 0x8e068fe
QWidget::event() at 0xb58da629
RGraphicsViewQt::event() at RGraphicsViewQt.cpp:104 0x8e062c0
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59066b5
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4af0509
0xb4af0d10
g_main_context_iteration() at 0xb4af0fce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb100d9e9
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0
RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca
main() at main.cpp:176 0x8792007
|
|
183 | QCAD (main) | Bug Report | Medium | Linux CUPS: QPrinter::init() causes SIGPIPE:Broken pipe | Closed | |
|
Task Description
new drawing
add new layer
save as DWG
File → Drawing Preferences → crash
/home/martin/workspace/rsframework/debug/qcad-bin [23943]
Thread [8] 23992 (Suspended : Container)
__kernel_vsyscall() at 0xffffe424
poll() at 0xb4f9703e
g_poll() at 0xb4b010bb
0xb4af0c46
g_main_context_iteration() at 0xb4af0fce
QEventDispatcherGlib::processEvents() at 0xb54a2741
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QThread::exec() at 0xb535e8ed
0xb544da4b
0xb5361b52
start_thread() at 0xb5177b05
clone() at 0xb4fa1d5e
Thread [7] 23954 (Suspended : Container)
Thread [6] 23953 (Suspended : Container)
Thread [5] 23952 (Suspended : Container)
Thread [3] 23950 (Suspended : Container)
Thread [2] 23946 (Suspended : Container)
Thread [1] 23943 (Suspended : Signal : SIGPIPE:Broken pipe)
__kernel_vsyscall() at 0xffffe424
send() at 0xb517f5b8
0xacd498b2
httpFlushWrite() at 0xacd49c21
0xacd4bcb8
cupsSendRequest() at 0xacd62470
cupsDoIORequest() at 0xacd62bc7
cupsDoRequest() at 0xacd62f0b
0xacd41d7f
cupsGetDests2() at 0xacd435d5
cupsGetDests() at 0xacd439a3
0xb5ad5153
0xb5a12133
0xb5a28344
0xb5a2b78c
QPrinter::init() at 0xb5a2d4ee
QPrinter::QPrinter() at 0xb5a2f01f
QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29
qtscript_QPrinter_static_call() at 0xafe863ba
0xb6bd7f88
0xb6ac7c97
0xb6a91114
0xa7b3a4fd
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa7b8e0f6
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa7b91f81
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa7b91c9f
0xb6a44262
0xb6a466c9
0xb6a8db4a
0xa7b9465c
0xb6a423e3
0xb6af06e0
0xb6ac201e
QScriptValue::call() at 0xb6bd2e67
REcmaShellActionAdapter::beginEvent() at REcmaShellActionAdapter.cpp:149 0x8c5981a
RDocumentInterface::setCurrentAction() at RDocumentInterface.cpp:290 0x8ef0094
RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:858 0x8798950
RGuiAction::slotTrigger() at RGuiAction.cpp:607 0x8f0e11f
RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8f58cb1
QMetaObject::metacall() at 0xb5478c83
QMetaObject::activate() at 0xb5489134
QAction::triggered() at 0xb5869d99
QAction::activate() at 0xb586b48f
0xb5d550c0
0xb5d5b485
QMenu::mouseReleaseEvent() at 0xb5d5d65d
QtScriptShell_QMenu::mouseReleaseEvent() at 0xb0272feb
QWidget::event() at 0xb58da629
QMenu::event() at 0xb5d5aec4
QtScriptShell_QMenu::event() at 0xb027621b
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59068fc
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4af0509
0xb4af0d10
g_main_context_iteration() at 0xb4af0fce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb100d9e9
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0
RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca
main() at main.cpp:176 0x8792007
|
|
181 | QCAD (main) | Bug Report | Medium | command line got uncaught exception | Closed | |
|
Task Description
start QCAD (no arguments → a new blank drawing is shown)
enter “new” into the command line
close both drawings / tabs
click into command line edit field and press “arrow up”
'di' |
|
179 | QCAD (main) | Bug Report | Medium | pick view got uncaught exception | Closed | |
|
Task Description
new drawing
draw something
add view → dialog pops up
press cancel
|
|
178 | QCAD (main) | Bug Report | Medium | add layer from property editor got uncaught exception | Closed | |
|
Task Description
new drawing
draw line
select it
choose “+” in property editor to add a new layer → the layer dialog pops up
press cancel
move the mouse back into the drawing area
'layer' |
|
175 | QCAD (main) | Bug Report | Medium | Trim.js: uncaught exception for ellipse / ellipse arcs | Closed | |
|
Task Description
draw line as limiting entity
draw ellipse and ellipse arc, both intersecting
modify → trim
select the diagonal line as limiting entity
move around with the mouse over ellipse or ellipse arc → crash
Uncaught exception at scripts/Modify/Trim/Trim.js:267: TypeError: Result of expression
'trimmed1.trimStartPoint' [undefined] is not a function.
267 trimmed1.trimStartPoint(is);
qsdb> .backtrace
#0 <anonymous>(op = RMixedOperation(0xc37b998), limitingEntity = RLineEntityPointer(0xc20c098),
limitingShape = RLine(RShape(address: "0xc217bd8"), startPoint: RVector(40, 36, 0) ,
endPoint: RVector(-3, -3, 0) ) , limitingPos = RVector(2.81463, 1.47073, 0) ,
trimEntity = REllipseEntityPointer(0xc3775f8), trimPos = RVector(12.4488, 5.03537, 0) ,
trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:267
#1 <anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:167
#2 <anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
#3 <anonymous>(event = REntityPickEvent(0xbfffd3c8), preview = true) at scripts/Modify/Trim/Trim.js:147
#4 <anonymous>(event = REntityPickEvent(0xbfffd3c8)) at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1225
#5 <global>() at -1
|
|
172 | QCAD (main) | Feature Request | Medium | send to back / to front | Closed | |
|
Task Description
implement
|
|
171 | QCAD (main) | Bug Report | Medium | arc split wrong | Closed | |
|
Task Description
|
|
170 | QCAD (main) | Bug Report | Medium | wrong scaling for ellipses / ellipse arcs | Closed | |
|
Task Description
|
|
160 | ECMAScript | Bug Report | Medium | SplitIntoEqualParts.js: Uncaught exception | Closed | |
|
Task Description
Uncaught exception at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174: Error: :-1:-1: REntity: Argument 0 is not of type REntity *REntity *.
<native>(RLineEntityPointer(0xb73b4c8)) at -1
<anonymous>(op = RAddObjectsOperation(0xb733790), argLine = RLineEntityPointer(0xb73b4c8)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174
<anonymous>(op = RAddObjectsOperation(0xb733790)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:111
<anonymous>(true) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:95
<anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
<anonymous>() at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:73
<global>() at -1
174 line.copyAttributesFrom(argLine);
qsdb> argLine
RLineEntityPointer(0xb73b4c8)
|
|
158 | QCAD (main) | Bug Report | Medium | polyline with segment radius mirrored wrong | Closed | |
|
Task Description
|
|
157 | QCAD (main) | Bug Report | Medium | rotate causes uncaught exception | Closed | |
|
Task Description
draw line
Modify → Rotate
Uncaught exception at scripts/Modify/Rotate/Rotate.js:117: Error: :-1:-1: Wrong number/types of arguments
for RDocumentInterface.applyOperation().
<native>(undefined) at -1
<anonymous>(event = RCoordinateEvent(0xbfffd478), preview = false) at scripts/Modify/Rotate/Rotate.js:117
<anonymous>(event = RCoordinateEvent(0xbfffd478)) at
/home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1197
<global>() at -1
117 di.applyOperation(this.getOperation(false));
|
|
156 | QCAD (main) | Bug Report | Medium | Isometric Projection fails for arc | Closed | |
|
Task Description
'shape.approximateWithLines'"0xc436c88" |
|
148 | QCAD (main) | Bug Report | Medium | "inline" leads to linking error on Linux | Closed | |
|
Task Description
RPainterPath.h
inline bool isEmpty() const;
g++ -rdynamic -Wl,-rpath,/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-o ../../debug/qcad-bin debug/main.o
-L/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-L/usr/X11R6/lib -L/home/martin/workspace/rsframework/debug
-L/home/martin/workspace/rsframework/debug/opendesign
-lecma -lecmaapi -ldwg -lpluginsqt -lgui -lentity -loperations -lspatialindexnavel
-lgrid -lsnap -lcore -lstemmer -lmath -lrxslt -lrxml -ldxf -lModelerGeometry
-lTD_BrepRenderer -lTD_Br -lTD_AcisBuilder -lTD_Db -lTD_DbRoot -lTD_Gs
-lTD_SpatialIndex -lTD_Gi -lTD_Ge -lTD_Root -lFreeType -lTD_Alloc -lRecomputeDimBlock
-lExFieldEvaluator -lQtWebKit -lQtScript -lQtScriptTools -lQtSvg -lQtSql -lQtXmlPatterns
-lQtXml -lQtOpenGL -lQtGui -lQtNetwork -lQtCore -lGLU -lGL -lpthread
/home/martin/workspace/rsframework/debug/libecmaapi.a(REcmaPainterPath.o): In function `REcmaPainterPath::isEmpty(QScriptContext*, QScriptEngine*)':
/home/martin/workspace/rsframework/src/scripting/ecmaapi/REcmaPainterPath.cpp:2078: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libgui.a(RGraphicsSceneQt.o): In function `RGraphicsSceneQt::endPath()':
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:71: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:74: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getBoundingBox() const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:104: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getDistanceTo(RVector const&, bool, double, bool) const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:127: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o):/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:134: more undefined references to `RPainterPath::isEmpty() const' follow
collect2: ld returned 1 exit status
temporary solution: changed method to non-line
|
|
144 | QCAD (main) | Bug Report | Medium | snap restriction buttons are not toggled | Closed | |
|
Task Description
the buttons works, but are not toggled (”restriction off” is always pushed)
|
|
87 | QCAD (main) | Bug Report | Medium | Advanced Selection hits 'debugger' statement | Closed | |
|
Task Description
Advanced selection dialog hits a debugger statement on line 1088.
Selection- Advanced Selection
Change first combo box to “Any”
|
|
77 | QCAD (main) | Bug Report | Medium | Linux: Printing crashes | Closed | |
|
Task Description
Printing segfaults under Linux after the printer dialog is shown.
|
|
73 | QCAD (main) | Bug Report | Medium | Uncaught exception: "cannot access member of deleted QO ... | Closed | |
|
Task Description
occurs sporadically, often when the application or a MDI child is closed, usually not reproducible.
Uncaught exception at /home/martin/workspace/rsframework/scripts/Tools/PainterPathViewer/../../library.js:50:
Error: cannot access member `isNull' of deleted QObject
50 (typeof(obj.isNull)=="function" && obj.isNull()===true));
|
|
68 | QCAD (main) | Bug Report | Medium | insert from library browser crashes | Closed | |
|
Task Description
new file
insert (drag-n-drop or insert button) from library browser → segfault
Thread [1] 12403 (Suspended : Signal : SIGSEGV:Segmentation fault)
RObject::getId() at RObject.h:92 0x8a11c82
RClipboardOperation::copy() at RClipboardOperation.cpp:66 0x8d4892a
RPasteOperation::apply() at RPasteOperation.cpp:30 0x8d4841a
RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,766 0x8de19bb
REcmaDocumentInterface::previewOperation() at REcmaDocumentInterface.cpp:4,711 0x889aaad
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa83ced9f
0xb6a423e3
<...more frames...>
|
|
61 | Documentation | Bug Report | Medium | QCAD 3 Manual | Closed | |
|
Task Description
Change the user manual directory / file names from ‘simpletextviewer’ to ‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown in the help menu.
We can simply drop the contents of the manual that is checked in and replace it with a simple note “No manual is available yet for this technology preview of QCAD 3”
|
|
45 | QCAD (main) | Bug Report | Medium | Hatch Polyline | Closed | |
|
Task Description
open the attached drawing
select the polyline
fill it with hatch pattern “stars” → looks ok, the whole area is filled
save the file
re-open it
there is a gap in the filling now, see attached screen shot
|
|
43 | QCAD (main) | Bug Report | Medium | Hatch ellipse | Closed | |
|
Task Description
cannot hatch single full ellipse
|
|
41 | QCAD (main) | Bug Report | Medium | dimensions: tolerance shown twice after block insert | Closed | |
|
Task Description
File “ExampleDrawings/data/dim_aligned.dwg”:
choose “Generate Example Drawings” → the element “aligned dimension” (with limits set) shows 0.010.01 now, since both label and tolerance limits are set (according to the property editor):
label: <>\S0.01^0.02;
upper limit: 0.01
same for lower limit
“Generate Example Drawings” inserts the drawings as blocks
|