QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
 406 QCAD (main)Bug ReportHigh QCAD Version 3 RC2 .exe does`nt run  Closed
100%
Task Description

Hi Andrew

I uninstalled QCAD 3 RC1 first then installed V3-RC2 seems to install ok but when I run qcad.exe it complains everytime that qcad.exe has stopped working!

Running on Windows 7 - 64bit

Regards

Clive

 799 QCAD (main)Bug ReportHigh Detect duplicates not working properly Closed
100%
Task Description

Windows 7-64
3.0.9
Detect duplicates tool not working properly.
Selecting this tool causes program to lag endlessly and malfunctions.
To reproduce bug:
1. Select all entities.
2. Select duplicates tool.
3. Nothing happens.
4. Select duplicate tool again and...bug!

 900 QCAD (main)Bug ReportHigh Using text in 3.1.2 freezes QCAD Closed
100%
Task Description

Placing text in a drawing using 3.2.1 causes the application to freeze.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8355#p8355

 904 QCAD (main)Bug ReportHigh Crash when inserting some blocks from part library Closed
100%
Task Description

Tested on Linux Mint-64
Inserting some exsisting blocks or newly user created blocks makes QCAD quit!
Permissions were checked and also tested by submitting new blocks to new folder...but problem remains.
See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8387#p8387

 518 QCAD (main)Bug ReportMedium Unable to use Library browser properly in RC4 Closed
100%
Task Description

Hi Andrew

In Ubuntu 11.10 and Windows 7 everything so far is working ok in QCAD apart from the Library browser!

1.In Win 7-64 I can run the browser and make a new folder, but when I try to set the permissions/open the folder - browser crashes.

2.In ubuntu 11.10 I first uninstalled RC2 then installed RC4. QCAD program runs ok but this time when I try to open up the browser (not a new folder)I get an error message stating that I do not have permissions to open the first file (vehicle -I think!)in RC2? If I select OK in the warning window the warning just keeps on repeating the same message for the next and subsequent files until I quit it.

 201 QCAD (main)Performance IssueLow unable to move/dock command line Closed
100%
Task Description

Cannot move/dock command line to right hand pane!

Regards

clive

 207 QCAD (main)Feature RequestLow command line: shortcut for activation Closed
100%
Task Description

Unable to use space bar to focus on command line to type in commands etc as in Version 2. Need to click in the command line first in order to do so - much easier to use press space bar!

 359 QCAD (main)Feature RequestLow Bigger lineweights Closed
100%
Task Description

Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!

Regards

Clive

 366 QCAD (main)Feature RequestLow Draw circles tangent to other entities Closed
100%
2 Task Description

Hi Andrew

It would be useful to have an option in the Circle tools to be able to draw a circle tangent to other entities such as lines/circles etc.

Regards

Clive

 416 QCAD (main)Bug ReportLow Line weights and types are unclear in property editor i ...Closed
100%
Task Description

In V3RC3 (on Windows 7 -64)

In property editor lineweights and line types choices are unclear, e.g 0.00mm is reading as ... (3 dots only)

Also the lineweights are reading as m not mm!

Line types are very unclear too!

Regards

Clive

 451 QCAD (main)Bug ReportLow No Help function at all now Closed
100%
Task Description

Nothing happens at all when clicking on Help!

Used to open before with limited info but now nothing.

3 RC3 - Win 7 -64

 457 QCAD (main)Bug ReportLow Print page set up! Closed
100%
Task Description

Windows 7 - 64

Via - edit>drawing preferences or Application preferences>print page set up, it seems to make no difference setting the page orientation to either “Portrait” or “landscape” because when you go to print preview the set up you previously set doesn`t overide and set the orientation “set buttons” in print preview, so you have to manually set the orientation for the page you want to print from here (in print preview) regardless of the previously “preferenced” set up.

regards

Clive

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

 471 QCAD (main)Feature RequestLow Feature request -to make the Library browser "dockable" ...Closed
100%
Task Description

It would be very useful to be able to “dock” the library browser in the main QCAD window.

 504 QCAD (main)Bug ReportLow Poor results from offsetting a Spline in RC 2/3 Closed
100%
Task Description

Offsetting a Spline, after exploding and converting to a polyline produces a poor result!

1. Version 2.2 - no problems for using polyline Tools > offset for splines - after exploding them and creating a polyline from the segments! The results were acceptable!

2. Version 3 RC3 or 2 (Ubuntu) - the resultant offset of the Spline was unacceptable in Version 3 RC2/3 and only 50% of the offset was created!

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

 522 QCAD (main)Bug ReportLow  View > toolbars is only accessible by right clicking. Closed
100%
Task Description

Andrew

In Windows 7-64, the view > toolbar options are only available by ‘right clicking’ in the main menu somewhere. They are not included in the view ‘drop down’ menu!

 581 QCAD (main)Bug ReportLow Unit sizes in 'metric' templates misleading - showing a ...Closed
100%
Task Description

Windows 7 -64

In the metric templates the unit size shown in the preview is showing as ‘Inch’ instead of millimeter. probably just a ‘typo’ mistake here as in reality when you open up a ‘metric’ template they are indeed measuring in millimeters!

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

604QCAD (main)Feature RequestLowMeasure and record X,Y coordinates tool - add to info ...Assigned
0%
Task Description

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

618QCAD (main)Feature RequestLowuser defined lineweightAssigned
0%
2 Task Description

To have the option to set your own ‘user defined’ line weight.

 619 QCAD (main)Feature RequestLow Status bar - X,Y etc. input fields  Closed
100%
Task Description

It could be very useful to have in the status bar area - input fields for typing in X and Y position, Distance and Angle etc...

For example these could be used instead of entering absolute/relative coordinates in the command line.

1.Draw line.
2.Start point - enter in X Field.
3.Next point - enter in Y Field.

This method could also be used for specifying positions when placing other entities.

For me I tend to use a combination of the command line/GUI for most work but I think for those who do not wish to use the command line this could be useful.

620QCAD (main)Feature RequestLowoption to have horizontal dimension info using vertical...Assigned
0%
2 Task Description

Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally.
See attached image:
Possibly this option could be added to the Label drop down menu.

 629 QCAD (main)Bug ReportLow Viewports - not retaining positions? Closed
100%
Task Description

in Win 7-64

Hi Andrew
when I set up my default choice of viewports - say ‘Two vertical’, they do not retain either the initial starting position or indeed the position I leave them in when I reopen a drawing. On opening a new/previous drawing - always one of the viewports is at ‘almost’ full extents!
I then have to manually re-position my viewports to suit.

Is this normal behavior happening here?
It would be good if a drawing opened with persistent viewport positions held, possibly this option could be added to the ‘Layout’ Viewports dialog window?

*Out of interest, when you introduce an isometric grid in the future - will it be possible to set up a ‘Three:Right’ layout view for example and have all three viewports showing different planes - Top, Front and South East?

Thanks

Clive

 630 QCAD (main)Feature RequestLow Select entities by type Closed
100%
Task Description

please see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=1177

from LeoP

” What would be really useful is a method to select entities by type, rather than by location or layer.

It could have a user interface like the snap command with buttons for the entity type to select, or like the line command with a drop-down box.

This would enable one to quickly select e.g. all texts in a drawing for subsequent attribute modification. Now one has to select each text individually if the texts are scattered over the drawing and layers...”

 636 QCAD (main)Feature RequestLow 64 bit compilation Closed
100%
Task Description

Hi,

I’m using QCAD2 quite a while now and after moving from FreeBSD-i386 to FreeBSD-amd64 there are some libraries missing in the 32 bit version (libXi and some more).

I’d strongly suggest making a 64 bit compilation of the pro version. The community edition does compile and run on FBSD-amd64 very well.

Maybe ths would better be posted to the suggestion list of the upcoming version 3 ...

Thanks for attention!
see topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=3&p=6558#p6558

 646 QCAD (main)Feature RequestLow Is a Debian Installation possible? Closed
100%
Task Description

Post from topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&p=6613#p6613

Re: QCAD 3 Final
by ralvejd » Fri Jul 20, 2012 9:43 pm

Yes nice news
I’m waiting for a Debian installation

 649 QCAD (main)Feature RequestLow To add an Array option. Closed
100%
Task Description

To re-introduce an ‘Array’ option with Number of columns/rows and Column/row spacing.

This option could be added to the Modify tool set so - could be used with all entities, not only blocks!

Wieder einzuführen Ein ‘Array’ Option mit Anzahl der Spalten / Zeilen und Spalten / Zeilen Abstand.

Diese Option könnte der Modify Tool so eingestellt, hinzugefügt werden - konnte mit allen Stellen, nicht nur Blöcke verwendet werden!

*Please see topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&p=6627&sid=1600f95e02d3121574a4d60ce019e16a#p6627

 655 QCAD (main)Bug ReportLow  Changing Minimal grid spacing option (px) - proves no ...Closed
100%
Task Description

Changing the Minimal grid spacing (px) proves non effective, in that - it does not reduce the number of steps to to reach target view!

Tested and agreed on Win 7 -64

See Topics:

http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&p=6691#p6691

and related - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&p=6694#p6694

 660 QCAD (main)Bug ReportLow Active Tool - 'tool bar' doesn `t stay redocked  Closed
100%
Task Description

The Active Tool tool bar doesn`t stay re-docked in QCAD 3 Final.
Please see topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2108

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
0%
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

 683 QCAD (main)Feature RequestLow Convert Spline to Polyline tool Closed
100%
Task Description

To have a tool that could convert splines to polylines would be useful, particularly for laser cutting work where a nice steady flow is needed, otherwise you can get an erratic ‘jumpy’ movement when cutting..
Maybe a ‘two’ step procedure;
1.First convert to arc/line segments.
2. Then if needed convert to a continuous polyline.

687QCAD (main)Feature RequestLowPlot Stamp optionAssigned
0%
Task Description

To add a Plot Stamp option for printing, to have options to print file name, date , time etc...

See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967

 697 QCAD (main)Feature RequestLow Option to configure the min/max number of segments in a ...Closed
100%
Task Description

Option to add a setting to configure the number (min/max) of segments for splines.

See topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=7007#p7007

700QCAD (main)Bug ReportLowSaved 'hatched' block loses hatching when using isometr...Assigned
0%
Task Description

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

708QCAD (main)Feature RequestLowTo re-introduce Tile and Cascade window optionsAssigned
0%
2 Task Description

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

 709 QCAD (main)Bug ReportLow Move/copy MV - GUI -button (on docked tool bar) not wor ...Closed
100%
Task Description

Windows 7 - 64
To reproduce:
1.Select entity.
2.Using a ‘docked’ Modify tool bar, click on the Move/Copy button.
3.Unable to move cross hairs to snap properly to a reference point.

* No problems with this from either - the Menu > Modify > Move/Copy or the Main CAD tools > Modification tools or from using keycode MV!
Only from a ‘docked’ modify tool bar.

 710 QCAD (main)Bug ReportLow snapshot 3.0.3 - input fields showing ' Expression is e ...Closed
100%
Task Description

Windows 7 -64
snapshot 3.0.3 - tool input fields showing ' Expression is empty ' , even after inputting values.

 712 QCAD (main)Feature RequestLow 3.0.3 - difficult to distinguish between Break out and  ...Closed
100%
Task Description

Its slightly difficult to distinguish between the Break out and Auto-trim buttons in 3.0.3 (snapshot) release, even with large buttons!

Maybe a different color - (Green for example?)for the horizontal line between the red dots in the new Auto-trim button.

714QCAD (main)Bug ReportLowIsometric view tool bar doesn`t remain ' docked'.Assigned
0%
Task Description

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

 718 QCAD (main)Bug ReportLow 3.0.5 -snap / info feedback problems Closed
100%
Task Description

In 3.0.5 using windows 7-64 and windows vista.
After selecting to use any drafting tool - either arc, circle or ellipse, polyline etc. there are problems with defining the second snap point onwards whether using auto snap or any of the snap tools,the info feedback i.e. End or Middle etc... is flickering or none at all.

Test:
1.Center, Point.
2.Define center.
3.Hard to define point, flickering occurs on graphics feedback for label.

I`m guessing this is another Graphic display problem here.

754QCAD (main)Bug ReportLowAdding or removing additional viewports - gives unwante...Assigned
0%
Task Description

Windows 7-64
3.0.7
When adding or removing additional viewports,an extra unnecessary window of the viewport is created.

758QCAD (main)Feature RequestLowLengthen/Shorten tool - add additional optionAssigned
0%
2 Task Description

When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.

 762 QCAD (main)Feature RequestLow Add option to place text to follow along a given curve, ...Closed
100%
2 Task Description

Add option to place text to follow along a given curve,arc etc...

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2330

 768 QCAD (main)Bug ReportLow Polyline > Delete segments between two nodes not workin ...Closed
100%
Task Description

Windows 7 - 64
3.0.8
Polyline > Delete segments between two nodes not working.

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
1 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

Showing tasks 1 - 50 of 170 Page 1 of 41 - 2 - 3 - 4 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing