|
1028 | QCAD (main) | Bug Report | Low | Draw > Line > Rectangle with Size: options toolbar layo ... | Closed | |
|
Task Description
... just cosmetic!
Rectangle with size: The option box “Reference Point” is a bit to small to show the whole text of the chosen option.
English / German = same behavior.
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1026 | QCAD (main) | Feature Request | Low | Selection Filter also present in the Menu "Selection" | Assigned | |
|
Task Description
It would be nice to have the Selection Filter also present in the Menu / Selection List
|
|
1025 | Translation | Bug Report | Low | Selection Filter / German translation | Closed | |
|
Task Description
The German translation isn’t shown in all parts of the Selection Filter.
|
|
1020 | QCAD (main) | Bug Report | Low | Line2PEx, Option-bar for angles disregard the Decimal P ... | Closed | |
|
Task Description
My QCAD setting for “Decimal Points” is “dot” instead of “comma”. (Application Preferences, General, Coordinate Format, Decimal Point: Dot ‘.’(Default))
The new Line2PEx tool will only accept a comma - if I use a dot it will be automatically replaced by a comma. The displayed angle in the drawing will use a dot. No red Text font warning for using an invalid value.
I used a screen-shot with an additional coordinate option to make it a bit clearer:
|
|
996 | QCAD (main) | Bug Report | Low | Can't scale controlled "Rich Text" multi Lines ... | Closed | |
|
Task Description
If I have multi lines with different heights in a Rich Text the scale tool works not at all or the scale factor works different on each lines.
This example is scaled with factor 2. First line works - second line keeps the proportions.
|
|
990 | QCAD (main) | Feature Request | Low | Default Names for Custom Property ... | Assigned | |
|
Task Description
Property Editor - Geometry - Custom - Add Custom Property
It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names. Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point
If I have predefined Names - I have just to fill out the value
|
|
981 | QCAD (main) | Feature Request | Low | New tool: Ellipse - Equidistant | Closed | |
1 |
Task Description
Bug or Feature request?
Tool “Parallel” is not working on an intact ellipse. If I explode the ellipse it will work but then it turns out to a Sisyphus task ...
|
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
975 | QCAD (main) | Feature Request | Low | Search/Replace accomplished info ... | Closed | |
|
Task Description
It would be nice to get a status information after the use of the “Search/Replace” tool.
Something like: “5 matches found and replaced”, or no “matches found”.
It helps allot to get an Idea what happens in your drawing. Right now the tool window will just disappear and you have no idea about any success.
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
6 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
963 | QCAD (main) | Bug Report | Low | Clip to rectangle / clear area on block references | Closed | |
|
Task Description
“Clip to rectangle / clear area” in combination with a Block will explode the Block and change all line attributes for the exploded ex-block.
Pics: Before / after using the tool.
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
945 | QCAD (main) | Feature Request | Low | Stretch tool for blocks ... | Closed | |
|
Task Description
It would be nice if we could use the Stretch tool also on blocks.
There are so many possibility’s to build a really good (time-saving) block-list /library with preassembled parts but if I have always to explode / ruin the block to use the stretch tool doesn’t helps the productivity.
|
|
937 | QCAD (main) | Bug Report | Low | Info Tools - Area: "Add measurement to drawing" doesn't ... | Closed | |
|
Task Description
XP/32
Info Tools - Area: “Add measurement to drawing” doesn’t work as expected
|
|
936 | QCAD (main) | Feature Request | Low | Disproportional scaling of block references | Assigned | |
|
Task Description
XP/32
... doesn’t works proper at circles and ellipses.
Circles: the scale works only proportional even though I have the options for x and y. Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
891 | QCAD (main) | Bug Report | Low | Block - Create Library item: unit / reference point pos ... | Closed | |
|
Task Description
Created library item does not have the same unit as source drawing. Zero point is not at chosen reference point.
Vers. 3.2.1, Drawing Unit “inch”!
... it takes the absolute 0 point as reference.
Millimeter works fine!!!
Rest of the units .... I don’t know
|
|
887 | QCAD (main) | Bug Report | Low | Wrong warning window with area selection ... | Closed | |
|
Task Description
Lower left to upper right selection which includes invisible blocks causes warning window if I try to use the clipboard “copy” or “cut” function:
“Trying to draw on or modify entities on a locked or invisible layer”
... but it works!
Upper right to lower left selection over all doesn’t calls the warning window!
|
|
870 | QCAD (main) | Bug Report | Low | Isometric projection of text creates unwanted bounding ... | Closed | |
|
Task Description
If I use the isometric tools for a text QCAD will keep a construction Box as a leftover ...
|
|
866 | QCAD (main) | Feature Request | Low | Paste block reference: add third option to rename paste... | Assigned | |
1 |
Task Description
Scenario:
Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.
Switch to Drawing 2, this drawing has also a Blockname X but with a different content.
Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.
No warning pops up - it just happens!
|
|
865 | QCAD (main) | Bug Report | Low | Invisible Blocks are causing a warning Window ... | Closed | |
|
Task Description
If I use in an area with invisible Blocks the “rectangular selection” in “lower left to upper right” direction for a move/copy, mirror, clipboard etc. action - a warning window appear. Also the reference points of the invisible blocks are visible.
If I use the “rectangular selection” in upper right to lower left direction everything works as expected.
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
863 | QCAD (main) | Bug Report | Low | "Auto Zoom" is aligned also on invisible blocks ... | Closed | |
|
Task Description
If I switch a Block to invisible and use then the “Auto Zoom” in my drawing - the zoom cutout will appear like the block would still be visible
Attachment: 1. “Auto Zoom” (Z, A) / Visible Block 2. “Auto Zoom” (Z, A) / Invisible Block
|
|
862 | QCAD (main) | Bug Report | Low | Dimension settings - "Keep proportion" setting can't be ... | Closed | |
|
Task Description
XP 32/ QCAD 3.1.6
Drawing Preferences - Dimension settings - “Keep proportion” setting changes will not be saved with the Drawing.
Maybe you have to try it a couple times with the same drawing
|
|
861 | QCAD (main) | Bug Report | Low | Widgets blends to early in ... | Closed | |
|
Task Description
I don’t know: Bug or Feature request ....
Example: If I move the “Library Browser” with the mouse closer than ~63px to the top corner it will go to blend in. Undo doesn’t works in this case - so I have to pull it out and re-size the widget.
Usually it should blend in if I’m over the bar or at least I have to be much closer to the corner - or not?
|
|
860 | QCAD (main) | Feature Request | Low | "Create Library item from selection" default Path ... | Assigned | |
|
Task Description
Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ... ... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources. And QCAD doesn’t remember the last path choice ....
If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.
It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ...
|
|
858 | QCAD (main) | Feature Request | Low | Circle/Arc tangential on entities ... | Closed | |
|
Task Description
I’m not sure but if this is a duplicate please delete!
Feature Request: It would be nice to have a tool what will help to draw tangential circles and arcs between other entities.
I imagine this tools with a three entities (circles, lines) selection or two entities plus a radius.
|
|
855 | QCAD (main) | Feature Request | Low | Scale dimension on/off option ... | Closed | |
|
Task Description
QCAD 3.1.5 - has a new “Dimensioning Scale adjustment option” (Property editor/Linear Factor). NICE!!!
What means - we are now able to change the dimension scale for existing dims!
My Feature request refers to new dimensions and I think it would be perfect to have a “Scale Factor - On/Off Option” for all Dim Tools.
That would bring us in the position to copy / scale a part of our drawing for a detail view and we could just use us usual the dimensioning tools (with a scale factor) for the dimensioning task ....
|
|
853 | QCAD (main) | Feature Request | Low | Keep selection after undo ... | Assigned | |
2 |
Task Description
If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection. If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.
It would be nice to keep the once chosen selection in both “undo” situation!
Same with similar functions like rotate etc. ....
|
|
852 | QCAD (main) | Bug Report | Low | Circle hatch undo not correctly working .... | Closed | |
|
Task Description
Task: Selected “all” (Circle + Hatch) Move / Copy tool, Reference, move/copy, place, KEEP ORIGINAL, OK, Undo, Works!!!
Same scenario but DELETE ORIGINAL, Undo, Doesn’t works correctly!
|
|
846 | QCAD (main) | Bug Report | Low | Auto Trim at an arc ... | Closed | |
|
Task Description
If I have to “Auto trim” a line between to construction (or what ever ) lines the Auto Trim function works as expected!
If I use the same constellation with an arc the Auto trim function will give me an uncontrolled, unexpected result
|
|
843 | QCAD (main) | Bug Report | Low | Can't snap to reference point of a block reference | Closed | |
|
Task Description
If I need to move etc. a block regarding to his reference point - I’m not able to snap to the reference point All other snap points are appear as just fine working ...
|
|
840 | QCAD (main) | Feature Request | Low | File > New from Template: Remember last used folder | Closed | |
1 |
Task Description
Task: Drawing - New from Template ...
My Default Template Folder in “Application Preferences” is on F: (USB Port). QCAD depicts to C:/Programme/QCAD pro 3.1.2/libraries/templates (Yes - I started QCAD new after adjusting the default Folder)
|
|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
838 | QCAD (main) | Bug Report | Low | Grid settings are not taken over ... | Closed | |
|
Task Description
If I do my Grid settings - there are not correctly taken over in existing or new drawings.
Some kind of multiplication?
|
|
829 | QCAD (main) | Feature Request | Low | Additional options for the Info Tool Area ... | Assigned | |
1 |
Task Description
The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options
Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!
It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area. Two mouse clicks for a rectangle area and done
In addition to that it would be nice to have the possibility to count up or down a couple areas. E.g. I measure area 1 plus area 2 or area 1 minus area 2 ... Maybe just with an additional keystroke like + or -
|
|
817 | QCAD (main) | Feature Request | Low | Snap and cut all intersection in a given area tool ... | Assigned | |
|
Task Description
As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch. To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries. The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....
Clive mentioned on this: Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.
|
|
813 | QCAD (main) | Feature Request | Low | New Snap tool: Isometric coordinates ... | Assigned | |
|
Task Description
It would be nice to have an additional Coordinate tool for isometric constructions.
If I’m working on an isometric drawing I have to design my things with x, y, z coordinates. Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc. With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines
|
|
812 | QCAD (main) | Bug Report | Low | Wrong Alert messages ... | Closed | |
|
Task Description
3.1 Beta / XP32
Two Points (C2), Two Points and Angle (A2), Two Points and Radius (CD), ONE Mouse-click = Alert message: “The two points are identical”
Tangent two circles (LT2), Click on first circle = Alert message: “No tangent possible”, Click on second circle = Alert message: “No tangent possible”
|
|
811 | QCAD (main) | Bug Report | Low | Rectangle(RE) with a defined x,y coordinate start point ... | Closed | |
|
Task Description
QCAD 3.0 / 3.1
Test case: set relative zero, choose rectangle RE tool, choose snap tool coordinate, Now QCAD is asking for the x,y coordinates and my thinking was it will just use them for the start point (what I’m looking for!) - but .... QCAD will use the given coordinates for the Start point of the rectangle(right!) AND as size for the rectangle(wrong!)
|
|
791 | QCAD (main) | Bug Report | Low | Info Tool Polygonal Area closing with right mouse click ... | Closed | |
|
Task Description
3.0.8 Setting: Application Preferences - Widgets - Command line - Show information as dialog: Ticked!
If I use the Info Tool Polygonal Area and decide to close it with a right mouse click the “Show information” dialog window pops up - just as expected. If I close the Dialog window with the OK Button .... a “CAD Tools” Menu pops up. Not expected
By the way - any chance to control the number of digits after the decimal point in the Info dialog window? 15 decimal places are most of the time just to much!
|
|
790 | QCAD (main) | Feature Request | Low | Dimension Setting - Extension Line - total length setti ... | Closed | |
|
Task Description
It would be nice to have the option for a “Short” Extension Line. This is often used in Architectural drawings. Yes, I know that I can explode a dimension and change it to that what I’m asking for - but that is really a Sisyphus task and destructs the function of a dynamic Dimension in QCAD.
|
|
789 | QCAD (main) | Feature Request | Low | Scale tool - mouse-pointer - inversely proportional sca... | Assigned | |
2 |
Task Description
3.0.8. Bug Report or Feature Request ..... I’m not sure!
If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale. x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...
|
|
774 | QCAD (main) | Feature Request | Low | Additional Button in the Blocklist menu for "Create Blo... | Assigned | |
1 |
Task Description
If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”. If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.
But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.
Or alternative an additional Button ...
Anyway - in my opinion would that make the “Blocklist” complete.
|
|
773 | QCAD (main) | Feature Request | Low | Line - Relative Angle / Orthogonal: Reference Point opt ... | Closed | |
|
Task Description
Reference Point options (Start, middle, end) also for “Relative angle” and “Orthogonal” .... like the other lines
|
|
764 | QCAD (main) | Feature Request | Low | Links to Data sheet, Part List ... | Assigned | |
1 |
Task Description
Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.
It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing. Like the bitmap function without displaying the files in the drawing ...
|
|
759 | QCAD (main) | Bug Report | Low | Button "Flip Block" doesn't remains Highlighted ... | Closed | |
|
Task Description
Insert Block:
If I use the “Flip Block” option (Horizontal and/or Vertical) the Buttons doesn’t remains Highlighted. It should remain Highlighted ...
|
|
757 | QCAD (main) | Feature Request | Low | Dim: Architectural tick and Leader Arrow size independe... | Assigned | |
1 |
Task Description
Leader Arrow size and the Architectural tick size are controlled by one and the same value.
It would be nice to get the possibility to adjust them independently from each other ...
|