QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  ascStatusProgress
 1819 QCAD (main)Feature RequestLow  Additional Options for "Paste along Entity" Closed
100%
Task Description

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

 655 QCAD (main)Bug ReportLow  Changing Minimal grid spacing option (px) - proves no ...Closed
100%
Task Description

Changing the Minimal grid spacing (px) proves non effective, in that - it does not reduce the number of steps to to reach target view!

Tested and agreed on Win 7 -64

See Topics:

http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&p=6691#p6691

and related - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&p=6694#p6694

2088QCAD (main)Bug ReportVery Low column headers of the "General: tool settings " resize...Assigned
0%
Task Description

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

 1604 QCAD (main)Bug ReportLow  Exploding splines has equal results disregarding the s ...Closed
100%
Task Description

The explode function preference ‘Spline Segments’ has no influence on the created number of polyline segments any more.

Attached is a file with an example.
The same spline exploded with setting 2-4-8 & 128 segments.
Result for the indicated spline is 59 and constant.

 1459 QCAD (main)Bug ReportVery Low  File > Revert: changes grid appearance Closed
100%
Task Description

... even if it wasn’t used in the saved drawing.

1870QCAD (main)Feature RequestLow Stretch tool / option to turn selection restriction on...Assigned
0%
Task Description

Hi,

since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.

That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?

It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.

 869 QCAD (main)Feature RequestLow  Support for block attributes Closed
100%
Task Description

I would like to use QCAD at work.
Since the drawing using block attributes (ATTRIB) is not displayed correctly, I am troubled.
Please give me correspondence by all means.

 522 QCAD (main)Bug ReportLow  View > toolbars is only accessible by right clicking. Closed
100%
Task Description

Andrew

In Windows 7-64, the view > toolbar options are only available by ‘right clicking’ in the main menu somewhere. They are not included in the view ‘drop down’ menu!

 1378 QCAD (main)Bug ReportLow  Wrong value separator accepted and accomplished Closed
100%
Task Description

My settings for Coordinate Format: Decimal Point = Dot

Accidentally using a comma instead of a dot in a value field leads to a wrong result without any warning.

Test:

Using the “Rectangle with Size” tool accidentally with a comma will not trigger a warning (red text) and it will draw a wrong sized rectangle.
It seems to me that QCAD is using the after comma value to draw this rectangle.
Given value 30,5 by 50,7 leads to a rectangle 5 by 7
Crazy values like 1.,.35 by 71.,.75 are also accepted and leads to a rectangle size of 35 by 75 without any warning.
A crazy value like 71.,..75 will finally trigger a red text warning!

Counter test horiz. Line: Value 100,25 leads to a line with 25 in length.
Value 100.25 leads to a line with 100.25 in length.

Using the same tools with the correct separator will work as expected!

Same game with most of all other tools which are asking for a given value. No warning at all - just wrongly accomplished.

 745 QCAD (main)Bug ReportLow -always-load-scripts not working Closed
100%
Task Description

Command line switch -always-load-scripts has no effect.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

 1546 QCAD (main)Bug ReportLow 'Open file' dialog shows no files - although the direct ...Closed
100%
Task Description

I have many .dxf files created in QCad-2.2.2.0 (which I still use) all of which open in LibreCad without issues.

If I try to open a file in the version below (or an earlier fairly recent version) the file chooser dialog is empty.

Version: 3.16.5.0 (3.16.5)
Build Date: Feb 20 2017
Qt Version: 5.6.2
Architecture: x86_64
Compiler: gcc 5.4.0
OS: Mageia 6 x86_64 with plasma5 D.E

However if I copy a file name from the same directory using Dolphin file manager and paste it into the filename field in the chooser (which is showing no files) the file opens up correctly.

I reported this in Mageia bugzilla here against an earlier version but there was no response as I think the maintainer is MIA. https://bugs.mageia.org/show_bug.cgi?id=18816

Today I decided to try the latest version in the hope that this issue would be fixed (I am also a packager with Mageia) but it is still the same.

I will add the build log as an attachment in case you see something that may be specific to our configuration.

It would be good if we could resolve this before the imminent release of Mageia 6 ;)

Running from CLI I see these around the time I open the file chooser dialog:
——–snip——— 22:05:02: Debug: TransactionListenerPlugin::postInit
22:05:02: Debug: got transaction
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:05:19: Debug: got transaction
22:05:47: Debug: got transaction
22:06:08: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file” 22:06:09: Debug: got transaction
———-snip——–

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
2 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

 863 QCAD (main)Bug ReportLow "Auto Zoom" is aligned also on invisible blocks ... Closed
100%
Task Description

If I switch a Block to invisible and use then the “Auto Zoom” in my drawing - the zoom cutout will appear like the block would still be visible :-(

Attachment:
1. “Auto Zoom” (Z, A) / Visible Block
2. “Auto Zoom” (Z, A) / Invisible Block

 1260 QCAD (main)Bug ReportLow "Break out segment" again arc is not a sharp cut to the ...Closed
100%
Task Description

Break out segment / Auto trim again arc is not a sharp cut to the arc (to long or to short),
Break out manual can’t snap to a line/arc intersection,

 804 QCAD (main)Bug ReportLow "Color by Layer" uses wrong Layer for Blocks Closed
100%
Task Description

Not sure whether this is intentional, but IMHO it is not logical and wrong:

When loading a block that has a drawing set to “color by layer” into any layer but “0”, it will still always show the color of the “0” layer.

However, it should show the color of the layer that this Block is in (this is likely true for all the other attributes).

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

 2128 QCAD (main)Feature RequestLow "Create Library Item" "Save As" dialogue doesn't rememb ...Closed
100%
2 Task Description

This is either a bug or a feature request, depending on perspective; my apologies if I’ve picked the wrong one. Additional discussion can be found here.

Steps to reproduce:
1. Create an entity
2. Run “Create Library Item” [BT]
3. Select Reference Point

Expected outcome:
“Save As” dialogue opens in the directory that the previous library item was saved in

Actual outcome:
“Save As” dialogue opens in ( RSettings.getLaunchPath() + “/libraries” )

Additional Context:
The reason I’ve categorized this as a bug is because, relative to the behaviour of the main “Save As” dialogue (which does remember the last directory used) the behaviour of the “Create Library Item” “Save As” dialogue is unexpected.

Software versions:
QCAD 3.25.2 Pro
Windows 10 Pro

 369 QCAD (main)Bug ReportMedium "Edit Text" Function fails ... Closed
100%
Task Description

3 RC1b

Trying to edit a Text calls the Qt Script Debugger with following Message:

Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText
170 simpleText.checked = textDataIn.isSimple();

I’m able to close the Script Debugger but I can’t edit the Text ....

 978 QCAD (main)Feature RequestLow "Frequently used" items for text Closed
100%
Task Description

Just floating an idea, recently I’ve had to use the diameter symbol many times in texts. At this moment it’s a chore, as that usually means browser, look for a page with symbol in it, copy, paste.

I wonder if the text entry could have some sort of a box for “frequently used” characters (or even phrases, or whatnot, but I presume a handful special characters that everyone can tailor to their needs would already be a huge plus)? Like, a 3×3 to 5×5 matrix below the Alignment panel or something along these lines.

 1522 QCAD (main)Bug ReportLow "Hatch from Segments" problem with polylines ... Closed
100%
Task Description

I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?

The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.

 1588 QCAD (main)Feature RequestLow "hole" realisation Closed
100%
Task Description

Trying to design PCB with QCad (as hobby ;) I found an inconvenience with routing tracks through holes: I need end one line, snapped to the one edge of contact pad and start new line from other side of the pad, otherwise if line goes through the hole and covers it, hole disappears or becomes damaged; or I need to clean each hole of track parts before printing.

so, subject is: to define a certain area of white or background colour, so if any object (line or other shape) intersects it, it will be just invisible inside this area. they may still be visible, say, in draft mode.

I’ve been thinkig about simpliest way to make it, but not sure. Maybe it can be an additional property of the hatch, or it can be specific “background” solid colour, which can be applied to the hatch (apply this colour to other kind of object is not a good idea).

Then contact pad can be defined as shape with smaller round hatch inside to designate hole, so we can route lines, snapping them to the hole centers, not caring about clearing these holes later of little pieces of tracks.

Maybe it can be usefull :) Thanks for your great work!

 148 QCAD (main)Bug ReportMedium "inline" leads to linking error on Linux Closed
100%
Task Description

RPainterPath.h

    inline bool isEmpty() const;
g++ -rdynamic -Wl,-rpath,/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-o ../../debug/qcad-bin debug/main.o
   -L/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-L/usr/X11R6/lib -L/home/martin/workspace/rsframework/debug
-L/home/martin/workspace/rsframework/debug/opendesign
 -lecma -lecmaapi -ldwg -lpluginsqt -lgui -lentity -loperations -lspatialindexnavel
 -lgrid -lsnap -lcore -lstemmer -lmath -lrxslt -lrxml -ldxf -lModelerGeometry
 -lTD_BrepRenderer -lTD_Br -lTD_AcisBuilder -lTD_Db -lTD_DbRoot -lTD_Gs
 -lTD_SpatialIndex -lTD_Gi -lTD_Ge -lTD_Root -lFreeType -lTD_Alloc -lRecomputeDimBlock
 -lExFieldEvaluator -lQtWebKit -lQtScript -lQtScriptTools -lQtSvg -lQtSql -lQtXmlPatterns
 -lQtXml -lQtOpenGL -lQtGui -lQtNetwork -lQtCore -lGLU -lGL -lpthread 
/home/martin/workspace/rsframework/debug/libecmaapi.a(REcmaPainterPath.o): In function `REcmaPainterPath::isEmpty(QScriptContext*, QScriptEngine*)':
/home/martin/workspace/rsframework/src/scripting/ecmaapi/REcmaPainterPath.cpp:2078: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libgui.a(RGraphicsSceneQt.o): In function `RGraphicsSceneQt::endPath()':
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:71: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:74: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getBoundingBox() const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:104: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getDistanceTo(RVector const&, bool, double, bool) const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:127: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o):/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:134: more undefined references to `RPainterPath::isEmpty() const' follow
collect2: ld returned 1 exit status

temporary solution: changed method to non-line

 1724 QCAD Community EditionSuggestionLow "OVERKILL" command Closed
100%
Task Description

Is it possible to create “OVERKILL” command like in AUTOCAD

 540 QCAD (main)Bug ReportVery Low "pa" ("parallel") keycode triggers wrong action Closed
100%
Task Description

In the latest QCAD Community Edition source code (2.0.5.0-1-community), the wrong action is triggered for the “pa” keycode. Specifically, it triggers the basic draw line command. Here is the relevant code from qcadcmd/src/rs_commands.cpp, in RS_Commands::keycodeToAction:

  } else if (c==tr("li", "line")) {
      ret = RS2::ActionDrawLine;
  } else if (c==tr("pa", "parallel")) {
      ret = RS2::ActionDrawLine;

I believe this should instead be:

  } else if (c==tr("li", "line")) {
      ret = RS2::ActionDrawLine;
  } else if (c==tr("pa", "parallel")) {
      ret = RS2::ActionDrawLineParallel;
1473QCAD (main)Feature RequestLow"Partial" circular/radial dimensionsAssigned
0%
2 Task Description

This is kind of related to FS#952, or rather a superset of it.

Consider the situation in the attached image. There is a perfectly good, albeit really shallow arc, making the radius somewhere in the vicinity of 600 millimeters, and the radial dimension being drawn accordingly.

Considering the other dimensions of the part, this is completely unusable, even to work with, really, but definitely so when it needs to be put on paper.

It would be nice to have some sort of “partial” (for my lack of a better word) radial/diametric dimensions where the dimension length can be adjusted.

Considering that this can be done with Leader, maybe a better (more generic) solution would be for Leader type dimensions to have options so they could automatically generate labels for various dimensions of a selected entity – sort of like having the Prefix/Tolerance/Scale options the other dimensions have, and have some additional fields there for selected entity and maybe dimension type (for example, radial or diametric for an arc-type entity).

 1274 QCAD (main)Bug ReportLow "Select Contour" selects every connected object Closed
100%
Task Description

Right now the “Select Contour” feature behaves like a “Select each and every connected line”.
I think that was not the intended purpose, so I report this as a bug.

I tested it on a honeycomb structure and instead of selecting just the outer contour it selected also every line inside the structure, which were connected to the contour.

 672 QCAD (main)Bug ReportLow "Snap to intersection" followed by "Dimension" does not ...Closed
100%
Task Description

Version 2.1:

Managed to use “Snap to grid” as the item was precisely 100mm or 120mm, but had it not been a precise multiple of 10mm there would have been a problem.

Thanks.

 1527 QCAD (main)SuggestionLow "Zeichnungseinheit konvertieren" translation missing .. ...Closed
100%
Task Description

... for the Option bar.

 1071 QCAD (main)Feature RequestVery Low (Bitmap) scaling convenience option Closed
100%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

 2220 QCAD (main)Bug ReportLow (CU) Convert Drawing Unit (inch, mm etc) to None fails Closed
100%
Task Description

(CU) Convert Drawing Unit (inch, mm etc) to none fails with the message “Warning, Unit “None” selected. Nothing to be done”.
In the same drawing I can change the Drawing Unit below “Drawing preferences/ Drawing Unit” to None without any problems.

 663 QCAD (main)Feature RequestLow (de-)select by property Closed
100%
Task Description

It would be nice if one could
- select
- deselect from the current selection
all entities with a specific property, for example:
- all entities which are texts
- all entities with angle === 180
- all entities with color !== red
The current property editor has the perfect gui for it. On a similar gui one could change a value there which changes the selection instead of the properties of the selected entities.

I think there would be no need for “and” or “or”, if the current selection can be reduced or extended.

 899 QCAD (main)Bug ReportLow (De-)Select Polygon - No Mode buttons/Icons showing Closed
100%
Task Description

Linux Mint -64

(De-)Select Polygon - No Mode buttons/Icons showing

 1862 ECMAScriptBug ReportLow (Groups of) Radio Button does not remember its state. Closed
100%
Task Description

Also, the way the state of radioButtons is saved on Qcad3.conf is rather confusing.

Exemple :
Two radioButtons _cr_i and _cr_x are in the same QWidget.
- check _cr_i
- validate the form with OK
- reopen the form, check _cr_x
- validate the form with OK

the config file reads

[_myPlenum2]
VisibleInMenu=true
...
_cr_i=_cr_i
_cr_x=_cr_x
...

On next form run, even if I select _cr_i, the radiobutton QWidget always takes the value of _cr_x.

 1052 QCAD (main)Performance IssueLow (Isometric) projection: poor preview performance Closed
100%
Task Description

Preview performance can be improved by projecting only once and then moving / pasting the projection.

2539QCAD (main)Bug ReportVery Low(Relative) Polar feet + surveyor notation fails.Assigned
0%
1 Task Description

Andrew,

A user essentially pointed out to an ACAD textbook example.
https://qcad.org/bugtracker/index.php?do=details&task_id=2533
Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html

Please refer to this topic:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652

Regards,
CVH

 1108 QCAD (main)Bug ReportLow [patch] fix linking and fix compiling with glibc 2.20 Closed
100%
Task Description

There are patches in attachment.

2174QCAD (main)Bug ReportLow[SOLVED] Numerous shortcomings when exploding Polylines...Assigned
0%
1 Task Description

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

 727 QCAD (main)Bug ReportMedium 100% CPU Usage with 3.0 Final Version. Closed
100%
Task Description

I am continuing my testing on version 3.0 Final.

I noticed that, with 3.0 Final open, the service “syslogd” (on OSX Leopard PPC) does get CPU consumption up to 100%, making the machine unusable.

This has never happened with the RC2 version.

It’s possible to have a copy of RC2 while they investigated the problem? Unfortunately I have not kept a copy.

 343 QCAD (main)Bug ReportMedium 2 drawings in print preview: inconsistencies Closed
100%
Task Description
  1. load 2 drawings
  2. switch both into print preview
  3. see attachment
  4. scale combo box shows only “1:1”
  5. switching drawings does not update options tool bar from drawing but drawing from options tool bar
 712 QCAD (main)Feature RequestLow 3.0.3 - difficult to distinguish between Break out and  ...Closed
100%
Task Description

Its slightly difficult to distinguish between the Break out and Auto-trim buttons in 3.0.3 (snapshot) release, even with large buttons!

Maybe a different color - (Green for example?)for the horizontal line between the red dots in the new Auto-trim button.

 718 QCAD (main)Bug ReportLow 3.0.5 -snap / info feedback problems Closed
100%
Task Description

In 3.0.5 using windows 7-64 and windows vista.
After selecting to use any drafting tool - either arc, circle or ellipse, polyline etc. there are problems with defining the second snap point onwards whether using auto snap or any of the snap tools,the info feedback i.e. End or Middle etc... is flickering or none at all.

Test:
1.Center, Point.
2.Define center.
3.Hard to define point, flickering occurs on graphics feedback for label.

I`m guessing this is another Graphic display problem here.

 820 QCAD (main)Bug ReportLow 3.1 beta - No reference manual found Closed
100%
Task Description

Windows 7-64

3.1 beta - No reference manual found.

 1562 QCAD (main)Bug ReportLow 3.16.7 MacOS 64bit Crashes on Launch Closed
100%
Task Description

Hi, I have just tried updating from 3.16.2 (working) to the latest version 3.16.7 on MacOS Lion 64bit, and the new version crashes immediately on launch.

Here is the Apple problem report:
Process: launchd [438]
Path: /Applications/QCAD_new_broken.app/Contents/MacOS/QCAD
Identifier: org.qcad
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [236]

Date/Time: 2017-03-22 08:28:00.043 +0000
OS Version: Mac OS X 10.7.5 (11G63)
Report Version: 9

Interval Since Last Report: 17907473 sec
Crashes Since Last Report: 173
Per-App Crashes Since Last Report: 6
Anonymous UUID: A36E8DD9-5A71-4361-9929-92E4633D8136

Crashed Thread: Unknown

Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00007fff5fc01028

Backtrace not available

Unknown thread crashed with X86 Thread State (64-bit):

rax: 0x0000000000000055  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x0000000000000000
 r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
rip: 0x00007fff5fc01028  rfl: 0x0000000000010203  cr2: 0x00007fff5fc01028

Logical CPU: 1

Binary images description not available

External Modification Summary:

Calls made by other processes targeting this process:
  task_for_pid: 1
  thread_create: 0
  thread_set_state: 0
Calls made by this process:
  task_for_pid: 0
  thread_create: 0
  thread_set_state: 0
Calls made by all processes on this machine:
  task_for_pid: 498
  thread_create: 0
  thread_set_state: 0

Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F98000000000000, 0x4B494E4753544F4E20202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0×87), Atheros 5416: 2.1.14.9
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST1000LM014-1EJ164, 1 TB
Parallel ATA Device: HL-DT-ST DVDRW GWA4080MA
USB Device: Built-in iSight, apple_vendor_id, 0×8502, 0xfd400000 / 3
USB Device: hub_device, 0×0424 (SMSC), 0×2514, 0xfd100000 / 2
USB Device: DataTraveler 2.0, 0×0951 (Kingston Technology Company), 0×1665, 0xfd130000 / 6
USB Device: Samsung M3 Portable, 0x04e8 (Samsung Electronics Co., Ltd.), 0x61b6, 0xfd120000 / 5
USB Device: iPod, apple_vendor_id, 0×1209, 0xfd140000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0×8205, 0x1a100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1a200000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021b, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0×8242, 0x5d100000 / 2

 1646 QCAD/CAMBug ReportMedium 3.18 has a HATCH issue Closed
100%
Task Description

If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.

But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.

 949 QCAD (main)Bug ReportLow 3.3.4 didn't promote available upgrade to 3.4  Closed
100%
Task Description

Yes, I had the ‘look for upgrades selected’ and ticked in the dialog. I only acknowledged the available update through the forum announcement made!

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

 636 QCAD (main)Feature RequestLow 64 bit compilation Closed
100%
Task Description

Hi,

I’m using QCAD2 quite a while now and after moving from FreeBSD-i386 to FreeBSD-amd64 there are some libraries missing in the 32 bit version (libXi and some more).

I’d strongly suggest making a 64 bit compilation of the pro version. The community edition does compile and run on FBSD-amd64 very well.

Maybe ths would better be posted to the suggestion list of the upcoming version 3 ...

Thanks for attention!
see topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=3&p=6558#p6558

 1354 QCAD (main)Bug ReportHigh 64 bit version crashes on Save or Save As command Closed
100%
Task Description

I just installed 3.12.5.0 (3.12.5) on a Dell Latitude E7250 (8GB RAM, i7-56000 CPU, 2.6GHz, Win 7 Pro 64 bit OS).

Started working my way through the user manual, tried to save a new file as ‘example’ and QCAD (64 bit Pro) crashed. Tried a few times with Save and Save As, empty files and a simple rectangle and it crashed every time.

Removed and re-installed the 64 bit version - same problem

Downloaded, installed 32 bit version as work around - works fine

 70 QCAD (main)Bug ReportLow 64bit Closed
100%
Task Description

ECMAScript engine (garbage collector) crashes on Mac OS X and Linux 64bit if QCAD binary is compiled as a 64bit binary.

Showing tasks 1 - 50 of 2556 Page 1 of 521 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing