|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1044 | QCAD (main) | Feature Request | Low | Radian measure symbol for Geometry labeling ... | Assigned | |
2 |
Task Description
We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...
It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.
|
|
1841 | QCAD/CAM | Feature Request | Low | QCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ... | Assigned | |
|
Task Description
Add SPx; with x being pen number from 1-8.
TODO: - Which color corresponds to which pen number? - What if there are more than 8 colors in a DXF files?
|
|
733 | QCAD (main) | Bug Report | Low | QCAD Trial: batch tool dwg2bmp produces no output | Assigned | |
|
Task Description
Some users are experiencing problems with dwg2bmp.
See forum at: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
1285 | QCAD (main) | Feature Request | Low | Property Painter | Researching | |
2 |
Task Description
Easy transfer of properties from one entity to others
|
|
995 | QCAD (main) | Feature Request | Low | Property editor: add 'edit block' button | Assigned | |
1 |
Task Description
Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
1678 | QCAD (main) | Suggestion | Low | Property Editor dialog | Assigned | |
|
Task Description
The line for “General properties”, “Layer” the line is too narrow, so you do not see the layer name when the Property Editor is pinned to the side. (see Forum - Suggestions and Feedback): https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239
|
|
1104 | QCAD (main) | Feature Request | Low | Printing: Add support for page range | Assigned | |
1 |
Task Description
When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.
|
|
1288 | QCAD (main) | Feature Request | Low | Print Preview Scaled Rulers | Assigned | |
1 |
Task Description
Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?
|
|
1172 | QCAD (main) | Feature Request | Low | Print Preview - Add 'Place Paper Option' tool | Assigned | |
1 |
Task Description
Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.
Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!
If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
729 | QCAD (main) | Bug Report | Low | Preferences not stored on some installations | Assigned | |
|
Task Description
Preferences not stored on some installations
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1877 | QCAD/CAM | Feature Request | Low | Post Processor Tutorial | Assigned | |
|
Task Description
Hallo Andrew,
I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.
Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
665 | QCAD (main) | Bug Report | Low | Possible printing error on Linux fedora 16? | Assigned | |
|
Task Description
On behalf of et76 Possible printing error using Linux 16 - needs further testing! Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
Au nom de et76 Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests! S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
|
|
734 | QCAD (main) | Feature Request | Low | Possibility to distribute a selection equal to each oth... | Assigned | |
3 |
Task Description
It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...
Screenshot: First row: Befor / Second row: after
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
1890 | QCAD (main) | Feature Request | Low | Possibility to address an QCAD extern font folder | Assigned | |
|
Task Description
Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD.
The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.
|
|
770 | QCAD (main) | Feature Request | Low | Polyline tool to delete segments between two nodes, lea... | Assigned | |
2 |
Task Description
I guess this is a case of wording and wrong expectations.
The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.
I propose to rename it to “Delete Nodes between two nodes”.
A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.
I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.
|
|
2457 | QCAD (main) | Bug Report | Low | Polyline start / end widths not saved for first segment | Assigned | |
|
Task Description
Draw a polyline with a single segment
Set the start and end width of the first vertice / segment (index 0)
Save
Reload
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Unconfirmed | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
502 | QCAD (main) | Feature Request | Low | Points on line: enter distance instead of number of poi... | Assigned | |
2 |
Task Description
Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.
|
|
1823 | dwg2pdf | Feature Request | Low | plotting error to pdf a Dwg where the view port is not ... | Assigned | |
|
Task Description
When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up the data in the view port is plotted north up. see attached DWG and pdf for clarification.
|
|
687 | QCAD (main) | Feature Request | Low | Plot Stamp option | Assigned | |
2 |
Task Description
To add a Plot Stamp option for printing, to have options to print file name, date , time etc...
See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967
|
|
612 | QCAD (main) | Feature Request | Low | Plot math functions | Assigned | |
1 |
Task Description
Input:
X axis min/max or choose line (?) or center (for polar functions)
function: y = f(x) / polar function: r = f(a)
Output:
function plot
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
1046 | QCAD (main) | Feature Request | Low | Please add script bindings for Qt 4.8.6 and 5.2.1 | Assigned | |
|
Task Description
These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.
(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)
Thanks,
|
|
859 | QCAD (main) | Feature Request | Low | Persistent selection button added to tool set. | Assigned | |
1 |
Task Description
It would be useful to have a persistent selection button added to the ‘selection’ tool set.
This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.
|
|
866 | QCAD (main) | Feature Request | Low | Paste block reference: add third option to rename paste... | Assigned | |
1 |
Task Description
Scenario:
Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.
Switch to Drawing 2, this drawing has also a Blockname X but with a different content.
Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.
No warning pops up - it just happens!
|
|
2034 | QCAD (main) | Feature Request | Low | Paint Properties to include modifying linetype scales w... | Assigned | |
|
Task Description
Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result. QCAD Pro 3.24 Windows10.
|
|
1928 | QCAD (main) | Feature Request | Low | Optionnally 'Auto clean up' after generation of NaN / N... | Assigned | |
1 |
Task Description
Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props. Some explicitly don’t and test their actions with isNull().
As these serve a purpose in some processes, trails of them can be part of the results. For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line. In a few cases its a desirable feature eg. controlpoint spline. (Allthough there are no Null props involved with equal successively controlpoints)
Many problem post on the forum are related to Null - Zero and so on.
In some cases it can’t be undone by re-editing the drawing. https://qcad.org/bugtracker/index.php?do=details&task_id=1925
If it can’t be undone by Undo/Redo it is a bug. https://qcad.org/bugtracker/index.php?do=details&task_id=1757
In some cases there is a difference noticed after file save-close-open.
|
|
1111 | QCAD (main) | Feature Request | Low | Option to swap right/middle mouse button | Assigned | |
|
Task Description
Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag. So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad. Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.
So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.
|
|
868 | QCAD (main) | Feature Request | Low | Option to save to dwt - drawing template. | Assigned | |
|
Task Description
An option to save to dwt (drawing template) would be so very useful. Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=8237#p8237
|
|
1731 | QCAD (main) | Feature Request | Low | Option to place text to other side | Assigned | |
|
Task Description
Hi Andrew,
It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(
Many thanks
C;live
|
|
2527 | QCAD (main) | Feature Request | Low | Option to mirrow viewports in paperspace | Assigned | |
3 |
Task Description
Hi, In paperspace I can scale and rotate etc. a viewport but I can’t mirrow it for to me unknown reasons. After reading and testing this user request I agree that it would make sence to have such an option. The solution from Andrew to accomplish that task with blocks / edit block in place is already a nice solution but to me it feels like paperspace would be the correct place with less action to manage. The user can still design the drawing as usal in modelspace without thinking about the “special treatment” for the block which is used for the mirrowed presentation.
Refering to forum conversation: https://qcad.org/rsforum/viewtopic.php?f=32&t=10611&p=43614#p43614
|
|
1356 | QCAD (main) | Feature Request | Low | Option to lengthen/Shorten from both ends of entity at ... | Assigned | |
2 |
Task Description
It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.
|
|
1722 | QCAD (main) | Feature Request | Low | Option to insert viewport at either of the rectangle co... | Assigned | |
|
Task Description
Hi Andrew,
Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.
Hope that makes sense.
Many thanks
Clive
|
|
620 | QCAD (main) | Feature Request | Low | option to have horizontal dimension info using vertical... | Assigned | |
2 |
Task Description
Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally. See attached image: Possibly this option could be added to the Label drop down menu.
|
|
1632 | QCAD (main) | Feature Request | Low | Option to add bespoke dimension precision + tolerance s... | Assigned | |
|
Task Description
Hi Andrew,
1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?
2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?
Many thanks
Clive
|
|
675 | QCAD (main) | Feature Request | Low | Option for fixed Text and Dimension heights ... | Assigned | |
|
Task Description
I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is. Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing. Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights. Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers.
|
|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
1464 | QCAD (main) | Feature Request | Low | Option button to access finer grid to snap | Assigned | |
1 |
Task Description
Hi,
I use eagle cad for pcb designs and I like its ability to snap to finer snap to grid when pressing option button (ALT in windows). I am fine with auto grid setting, however, it would be good to also have a way to access finer grid when pressing down option button.
For example, when zoomed out, grid is 100mm apart. When pressing down on the option button (ALT in windows), grid switches to finer 10mm. This will save me time, zooming in to access finer grid to snap to.
|
|
631 | QCAD (main) | Feature Request | Low | Option "Scale" für das öffnen von Templates ... | Assigned | |
|
Task Description
Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.
Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.
Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...
|
|
2387 | QCAD (main) | Feature Request | Low | Open Drawings on Layout Block by Default | Assigned | |
|
Task Description
As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.
Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.
At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).
|
|
704 | QCAD (main) | Feature Request | Low | Old Hatch Function | Assigned | |
2 |
Task Description
It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.
Thanks, Bob
|