|
1583 | QCAD (main) | Bug Report | Very Low | Option / Rotation missing defaults for 15 and 345 degre ... | Closed | |
|
Task Description
... just cosmetic!
The Option drop down list for rotations (e.g. Paste etc) shows all steps incremental for every 15 degree - but 15 and 345 degree are missing.
I’m happy that we don’t have bigger problems!!!
|
|
1582 | QCAD (main) | Bug Report | Low | Layer > Show all Layers / Hide all Layers: unexpected o ... | Closed | |
|
Task Description
Hi,
if I create in a new drawing a layer list and use the Show all Layers / Hide all Layers function everything works as expected.
If I hide one or more Layers individually and directly in the Layer List (click on the Eye) I can’t make them visible with the Show all Layer function. It looks like individual hidden Layer are protected with a higher priority.
If I load an “old” drawing all individual settings for a hidden Layer are with a higher priority than Show all Layers. If I click every single Eye for each Layer to make them visible then I’m again able to toggle the visibility for all Layer in once.
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1502 | QCAD (main) | Feature Request | Low | Info tool / Setting for Font and Size ... | Assigned | |
2 |
Task Description
It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?
|
|
1491 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: cancelling dialog ... | Closed | |
|
Task Description
Select entities, launch the Layer tool: Create Layer from Selection, change your mind - cancel this tool,
QCAD moves - regardless the cancellation - all selected entities to the active layer.
|
|
1475 | QCAD (main) | Bug Report | Low | Print Preview / fit to pages fails ... | Closed | |
|
Task Description
... in dependence to the used Units.
I have notice this behavior a couple times before but wasn’t sure what is the trigger for that. Now I figured out one (I’m sure there are more) scenario which shows the effect:
New drawing, Drawing preferences; Drawing Units: Meter, Meter, Metric,
Printing Page: ISO A4
Print Preview:
Auto fit drawing to page - fails to calculate the scale, Auto fit pages to drawing - fails also ...
Counter test: same drawing - change Paper Unit to mm, Reset Paper size to A4 ...
... and it works flawless
|
|
1459 | QCAD (main) | Bug Report | Very Low | File > Revert: changes grid appearance | Closed | |
|
Task Description
... even if it wasn’t used in the saved drawing.
|
|
1457 | Website | Bug Report | Low | Website FAQ Deutsch | Closed | |
|
Task Description
Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.
http://www.qcad.org/de/qcad-documentation/faq
|
|
1446 | QCAD (main) | Feature Request | Low | New Polygon tool | Assigned | |
2 |
Task Description
Hi,
if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.
It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.
|
|
1428 | QCAD (main) | Feature Request | Low | Snap middle of the minimum distance between two entity'... | Assigned | |
5 |
Task Description
Hi,
from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.
Pic 1: Given situation Pic 2: Result after using this new snap tool
Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?
|
|
1427 | QCAD (main) | Bug Report | Low | Info Tool / Polylinie Area (II)/ Preview broken | Closed | |
|
Task Description
Print “Command Line” and as “Add measurement to drawing” works as expected.
|
|
1415 | QCAD (main) | Bug Report | Low | Text TE - Only simple text possible | Closed | |
|
Task Description
Text - Only simple text is possible. Checked or unchecked option “Simple Text” will not change this. Reboot QCAD after changing shows also no effect.
|
|
1378 | QCAD (main) | Bug Report | Low | Wrong value separator accepted and accomplished | Closed | |
|
Task Description
My settings for Coordinate Format: Decimal Point = Dot
Accidentally using a comma instead of a dot in a value field leads to a wrong result without any warning.
Test:
Using the “Rectangle with Size” tool accidentally with a comma will not trigger a warning (red text) and it will draw a wrong sized rectangle. It seems to me that QCAD is using the after comma value to draw this rectangle. Given value 30,5 by 50,7 leads to a rectangle 5 by 7 Crazy values like 1.,.35 by 71.,.75 are also accepted and leads to a rectangle size of 35 by 75 without any warning. A crazy value like 71.,..75 will finally trigger a red text warning!
Counter test horiz. Line: Value 100,25 leads to a line with 25 in length. Value 100.25 leads to a line with 100.25 in length.
Using the same tools with the correct separator will work as expected!
Same game with most of all other tools which are asking for a given value. No warning at all - just wrongly accomplished.
|
|
1377 | QCAD (main) | Bug Report | Very Low | CE - is asking to save an untouched drawing | Closed | |
|
Task Description
If I launch the CE edition / do nothing with the empty default drawing and then try to terminate QCAD an unexpected warning pops up:
Do you want to save the changes you made in ‘Untitled 1’ ...
Hey - I haven’t change anything and there is nothing what needs to be saved ...
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
1326 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Radius: not all solution ... | Closed | |
|
Task Description
If I try to draw a circle between two little circles with a radius (e.g.) of 3000 the tool shows me only two possibility’s - but there are much more. If I make a counter test with the tool “2 Tangents with Point” all possibility’s are correct shown.
first pic “2 Tangents with Point” correct,
second pic “2 Tangents + Radius” incorrect,
|
|
1325 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: trims to invisible entities | Closed | |
|
Task Description
“Autotrim” ignores status on invisible and/or blocked layer and will still trim along invisible entities.
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
1301 | QCAD (main) | Bug Report | Very Low | Auto Zoom includes invisible Blocks | Closed | |
|
Task Description
Open drawing and Auto Zoom will also use invisible Blocks for the displayed Zoom Factor.
|
|
1289 | QCAD (main) | Bug Report | Low | Spline from fit points: load error for non-periodic but ... | Closed | |
|
Task Description
After saving an open designed Spline QCad will open it the next time as a closed spline. Trying to fix this in the Property Manager using “Closed Periodic yes/no” leads to an open but broken spline.
Pic 1 = designed Pic 2 = saved/opened from HD Pic 3 = Try to fix this with the Property Manager
|
|
1284 | QCAD (main) | Feature Request | Low | Count up counter for consecutive number labeling | Closed | |
|
Task Description
please see below:
http://www.qcad.org/rsforum/viewtopic.php?f=107&t=3781
|
|
1277 | QCAD (main) | Bug Report | Low | Block > Insert Block: block Attributes invisible by def ... | Closed | |
|
Task Description
I defined new attributes in a 3.11.0 drawing. I can’t get it working. I loaded an old drawing, knowing that there are working attribute in - there are not anymore working in 3.11.0
Synchronize Attributes doesn’t helps to solve the problem.
Old drawing attached ...
|
|
1276 | QCAD (main) | Bug Report | Low | File > Print Preview: black/white, grayscale mode have ... | Closed | |
|
Task Description
Print Preview: Black and white/Greyscale mode doesn’t works on Text.
|
|
1272 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: not undoable when used on spline | Closed | |
|
Task Description
Scenario 1: like to use “Breakout segment” on a spline, Status bar tells me that I CAN use this tool on a spline, Breakout: works, Undo: works, Everything fine ...
Scenario 2: like to use “Breakout manual” on a spline, Status bar tells me NOT to use this tool on a spline but ... Breakout manual: works, Undo: works, I think just the status bar needs an Infotext update.
Scenario 3: like to use “Auto Trim” on a spline, Status bar tells me NOT to use this tool on a spline but ... Auto Trim: works, Undo: works NOT, I think the status bar needs an Infotext update and I guess in the undo function is a bug.
|
|
1267 | QCAD (main) | Bug Report | Low | Options for Print Preview not correct working | Closed | |
|
Task Description
Please double check the functionality of the Print options - I think that there are not correct working.
Move Paper position = OK, Autofit drawing to paper = out of center, wrong scale Autofit pages to drawing = to many pages are used, Auto center = out of center,
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
1260 | QCAD (main) | Bug Report | Low | "Break out segment" again arc is not a sharp cut to the ... | Closed | |
|
Task Description
Break out segment / Auto trim again arc is not a sharp cut to the arc (to long or to short), Break out manual can’t snap to a line/arc intersection,
|
|
1251 | QCAD (main) | Bug Report | Low | QCAD CE can't read ä,ö ü in a file name | Closed | |
|
Task Description
The QCAD Community Edition isn’t able to read / import dxf files with a German “Umlaut” like ä,ö, ü in the dxf file name. If I change the file name from a “ä” into a “ae” QCAD CE will open the file flawless.
|
|
1245 | QCAD (main) | Bug Report | Low | Zoom in / zoom out: drawing painted at inconsistent off ... | Closed | |
|
Task Description
Zooming in or out repeatedly (keeping + or - key pressed or using mouse wheel) shows the drawing at incorrect offsets in between frames with the correct offset.
Original report:
Zoom in and out with the Mouse wheel is working but it is unfortunately jumping in a zickzack course.
|
|
1222 | QCAD (main) | Bug Report | Low | Selection Filter / Line / Angle in radians | Closed | |
|
Task Description
If I try to use the Selection Filter to find Lines regarding to the used Angle it fails in many cases.
In my test drawing you can see that I’m able to select Lines with an 0° Angle but I’m not able to select any of the other lines with e.g. an 45° / 90° 180° or 315° etc. angle.
|
|
1217 | QCAD (main) | Bug Report | High | Modify > Explode: crash for non-explodable entities | Closed | |
|
Task Description
- Select line - Modify > Explode
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1202 | QCAD (main) | Bug Report | Low | Defaults - New drawing - Printing colors setting shows ... | Closed | |
|
Task Description
Default settings (Application preferences) for “Printing colors” shows no effect on a “Grayscale” or a “Black and white” setting. Regardless the setting a new drawing is always presented with a “Full color” adjustment.
|
|
1191 | QCAD (main) | Bug Report | Very Low | Toolbar: Unnecessary or double divider | Closed | |
|
Task Description
Yes - it is only cosmetic but it is also stealing space in the Toolbar.
Would be nice to have them removed.
|
|
1188 | Translation | Bug Report | Low | A few missing translations for the German Interface | Closed | |
|
Task Description
“Paste Along Entity”
- Menü/Bearbeiten, - Applikationseinstellungen/Werkzeugeinstellungen, - QCAD Benutzerreferenz/Bearbeiten, - Werkzeugleisten/Symbol, Alt text,
“Recent files history size” Applikationseinstellungen/Zuletzt geöffnete Dateien
“Default lineweight for new layers” Applikationseinstellungen/Layer/Layer hinzufügen
“Hide internal blocks” Applikationseinstellungen/Widgets/Blockliste
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
3 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
1186 | QCAD (main) | Bug Report | Low | Snap > Intersection manual: not working for polyline se ... | Closed | |
|
Task Description
Snap to “Intersection manual” is only working in dependency on Line/Polyline orientation.
Two Polylines (not each other crossing): doesn’t works.
One Line, one Polyline (not each other crossing) works only in dependency on entity orientation.
|
|
1170 | QCAD (main) | Feature Request | Low | More options for "Paste along entity" | Closed | |
1 |
Task Description
The new tool “Paste along entity” is very useful! But I work mostly in mechanical engineering and would like to see more options to determine where it has to start with the first insert item.
Screenshot:
1. That is how it works right now - no chance to get it started on both ends of an line.
2. If I need to have my items also on the ends I have to use additional the normal “Paste” function.
3. If I could tell the “Paste along entity” that there is a start and end “Base” dimension then I’m a big step further.
I could tell the tool that it has to start at “0” or at “25” and the rest is just regarding the calculation. Correct?
However - you need many times in mechanical engineering etc. a hole pattern which will start at:
0,25,25,25,25,25,25,25,25,0
or
25, 123.5, 123.5, 123.5, 123.5, 123.5, 25
It would be very nice to have this also in combination with the “Paste along entity” tool
|
|
1151 | QCAD (main) | Bug Report | Low | Modify > Chamfer / Round: broken between first and last ... | Closed | |
2 |
Task Description
At closed Polygons: Chamfer / Bevel / Round tools are not proper working at the Start/End corner transition.
see also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3192&p=11358#p11358
|
|
1150 | QCAD (main) | Bug Report | Low | Snap to dimension reference points | Closed | |
|
Task Description
... except reference points I can’t anymore snap to any line on a Dimension. To make a proper alignment I need to use the Grid or other entities.
|
|
1148 | Translation | Bug Report | Low | Äquidistante: "Polyline" instead of "Polzlinie" | Closed | |
|
Task Description
Äquidistante: Spelling correction: “Polyline” instead of “Polzlinie” ...
|
|
1147 | QCAD (main) | Bug Report | Low | View > Zoom to selection with only vertical / horizonta ... | Closed | |
|
Task Description
“Zoom to selection” shows no effect on vertical and horizontal lines: Message: “No selection found”.
Recognizable at: vertical lines, horizontal lines, Rectangle, Rectangle with size, Polygon Center Point, Polygon two corner (only in the case that you have vertical/horizontal lines),
Shapes as a polyline - no problem.
|
|
1136 | Translation | Bug Report | Low | Selection filter: property list not translated | Closed | |
|
Task Description
QCAD Pro / Deutsch
Selektionsfilter: Eigenschaft / Auswahlliste wird nicht in Deutsch angezeigt.
|
|
1125 | QCAD (main) | Feature Request | Low | Property Editor / Total angle of an arc | Closed | |
1 |
Task Description
Hi,
if I have an arc and use the Property Editor to get the Geometrical information I always miss the total angle of the arc.
Yes - I have the Start and the End angle but to get the Total angle I have to draw construction lines to be able to use the Angular Dim or Info angle tool /or I need to use a pocket calculator ...
It would be nice to have this calculated by QCAD - I assume it can’t be that difficult to design an extra field which will display, based on the start and end angle, the total angle of an arc.
What do you think?
|
|
1119 | QCAD (main) | Task | Low | Improve presentation of linetype names in combobox | Closed | |
1 |
Task Description
The Linetype Names in the pull-down menu for Layer are hardly readable - it seams to me that the description is used twice (in different ways) in each row. Till 3.6.4 the Information was short and clear.
|
|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1095 | QCAD (main) | Bug Report | Low | Isometric projection: Projection uses application prefe ... | Closed | |
|
Task Description
QCAD start, Application Preferences: Units: inch Dim: Fractions
Changed the Drawing Preferences to: Units: mm Dim: Decimal
Design a Dim and it will be created with the mm/Deci settings - as expected,
Select now the Dim - activate the ISO Tool - the try to determine the reference point fails / it’s way of the clicked point and now the produced ISO Projection will use the attributes for DIM’s from the “Application Preferences” setting - hmmmmmmm, not as expected
|