|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
734 | QCAD (main) | Feature Request | Low | Possibility to distribute a selection equal to each oth... | Assigned | |
3 |
Task Description
It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...
Screenshot: First row: Befor / Second row: after
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
1890 | QCAD (main) | Feature Request | Low | Possibility to address an QCAD extern font folder | Assigned | |
|
Task Description
Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD.
The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.
|
|
2019 | QCAD (main) | Bug Report | Low | Polyline with segment widths: uneven arc segments | Closed | |
|
Task Description
Example shows the effect on a ring (Menu → Draw → Ring)
|
|
2199 | QCAD (main) | Bug Report | Low | Polyline with segment widths: duplicate rendering as bl ... | Closed | |
|
Task Description
Block contains a polyline with customized width
Works flawless with 3.25.0
Reported by claudioarch https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8205
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
753 | QCAD (main) | Bug Report | Low | Paste Preview confusing .... | Closed | |
|
Task Description
If I paste something from the clipboard to a drawing the scales of dims are wrong in the preview.
It is difficult to place it right with a confusing preview of that what I have to place ...
|
|
866 | QCAD (main) | Feature Request | Low | Paste block reference: add third option to rename paste... | Assigned | |
1 |
Task Description
Scenario:
Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.
Switch to Drawing 2, this drawing has also a Blockname X but with a different content.
Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.
No warning pops up - it just happens!
|
|
2040 | QCAD (main) | Feature Request | Low | Parallel and Offset tool - digit limit for Number to s ... | Closed | |
|
Task Description
LP - Number limit: 2 digits (max. 99)
LG - Number limit: 2 digits (max. 99)
OF - Number limit: 3 digits (max. 999)
OH - Number limit: 2 digits (max. 99)
Yes I know - it’s also a performance question but compared to ...
... Copy/Move (MV) next to infinite digits (max. ???)
... Paste Along Entity (PE) next to infinite digits (max. ???)
|
|
1986 | QCAD (main) | Bug Report | Low | Page Tags set as default not displayed | Closed | |
|
Task Description
Cases:
1. QCAD default start drawing: Application Preferences, Page Tags enabled, Load new drawing (Menu/File/New), Launch Print Preview, Page Tags not displayed on print preview page, Check Drawing Preferences shows that Page Tags are still enabled, turn it off, turn it on, confirm with OK makes the Page Tags visible on the Print Page.
2. Customized start template drawing - saved as template with enabled Page Tags - same behavior.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6673
|
|
1806 | QCAD (main) | Bug Report | Very Low | Overlay Toolbar visibility in GUI not saved | Closed | |
|
Task Description
Switch “Overlay” Toolbar to visible below: View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.
|
|
1267 | QCAD (main) | Bug Report | Low | Options for Print Preview not correct working | Closed | |
|
Task Description
Please double check the functionality of the Print options - I think that there are not correct working.
Move Paper position = OK, Autofit drawing to paper = out of center, wrong scale Autofit pages to drawing = to many pages are used, Auto center = out of center,
|
|
2527 | QCAD (main) | Feature Request | Low | Option to mirrow viewports in paperspace | Assigned | |
3 |
Task Description
Hi, In paperspace I can scale and rotate etc. a viewport but I can’t mirrow it for to me unknown reasons. After reading and testing this user request I agree that it would make sence to have such an option. The solution from Andrew to accomplish that task with blocks / edit block in place is already a nice solution but to me it feels like paperspace would be the correct place with less action to manage. The user can still design the drawing as usal in modelspace without thinking about the “special treatment” for the block which is used for the mirrowed presentation.
Refering to forum conversation: https://qcad.org/rsforum/viewtopic.php?f=32&t=10611&p=43614#p43614
|
|
675 | QCAD (main) | Feature Request | Low | Option for fixed Text and Dimension heights ... | Assigned | |
|
Task Description
I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is. Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing. Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights. Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers.
|
|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
1583 | QCAD (main) | Bug Report | Very Low | Option / Rotation missing defaults for 15 and 345 degre ... | Closed | |
|
Task Description
... just cosmetic!
The Option drop down list for rotations (e.g. Paste etc) shows all steps incremental for every 15 degree - but 15 and 345 degree are missing.
I’m happy that we don’t have bigger problems!!!
|
|
631 | QCAD (main) | Feature Request | Low | Option "Scale" für das öffnen von Templates ... | Assigned | |
|
Task Description
Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.
Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.
Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
981 | QCAD (main) | Feature Request | Low | New tool: Ellipse - Equidistant | Closed | |
1 |
Task Description
Bug or Feature request?
Tool “Parallel” is not working on an intact ellipse. If I explode the ellipse it will work but then it turns out to a Sisyphus task ...
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
813 | QCAD (main) | Feature Request | Low | New Snap tool: Isometric coordinates ... | Assigned | |
|
Task Description
It would be nice to have an additional Coordinate tool for isometric constructions.
If I’m working on an isometric drawing I have to design my things with x, y, z coordinates. Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc. With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines
|
|
1446 | QCAD (main) | Feature Request | Low | New Polygon tool | Assigned | |
2 |
Task Description
Hi,
if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.
It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
2232 | QCAD/CAM | Bug Report | Low | Nesting fails when parts fit plus minus null on sheets | Closed | |
|
Task Description
Just lost a detailed report (token?)- now a short version!
Nesting fails when parts fit plus minus null on sheets. My parts should fit regarding to the measurements on a sheet multiple times. The nesting tool can’t find a solution.
Options are: Quantity multiplier: 0 Rotation: 4 Sheet margin: 0 Margin: 0 Tolerance: 0
If I modify the parts and make them slightly smaller then a nesting is done as expected. Did I miss something?
|
|
473 | QCAD (main) | Bug Report | Low | Move, restricted horizontal, intersection .... | Closed | |
|
Task Description
Move/Copy doesn’t work with the combination restricted horizontal and snap to intersection manually.
|
|
1628 | QCAD (main) | Feature Request | Low | Move / Copy and snap tangential | Assigned | |
3 |
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601
|
|
722 | QCAD (main) | Bug Report | Low | Mouse wheel zoom .... | Closed | |
|
Task Description
XP 32
Vers. 3.0.0 Mouse zoom in and out with the Mouse-wheel = nice and smooth ;)
Vers. 3.0.5 Mouse zoom in and out with the Mouse-wheel = jumping zigzag ways during it zooms .... :(
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
388 | QCAD (main) | Feature Request | Low | More options for Polygons ... | Closed | |
2 |
Task Description
Possibility to draw Polygons with a given dimension for across flats (not only corners).
|
|
2087 | QCAD (main) | Feature Request | Low | More options for "Paste along Entity" [PE] | Assigned | |
1 |
Task Description
“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.
Would be a nice time saver to have the same options for “Paste along Entity” too.
|
|
1170 | QCAD (main) | Feature Request | Low | More options for "Paste along entity" | Closed | |
1 |
Task Description
The new tool “Paste along entity” is very useful! But I work mostly in mechanical engineering and would like to see more options to determine where it has to start with the first insert item.
Screenshot:
1. That is how it works right now - no chance to get it started on both ends of an line.
2. If I need to have my items also on the ends I have to use additional the normal “Paste” function.
3. If I could tell the “Paste along entity” that there is a start and end “Base” dimension then I’m a big step further.
I could tell the tool that it has to start at “0” or at “25” and the rest is just regarding the calculation. Correct?
However - you need many times in mechanical engineering etc. a hole pattern which will start at:
0,25,25,25,25,25,25,25,25,0
or
25, 123.5, 123.5, 123.5, 123.5, 123.5, 25
It would be very nice to have this also in combination with the “Paste along entity” tool
|
|
363 | QCAD (main) | Bug Report | Low | Modify tool "Stretch" only one time ... | Closed | |
|
Task Description
3.0 RC1
The Stretch Tool works only for one task and than you have to reselect it again for the next task. Who really works with the stretch tool has to use it (often) a couple times consecutively to get the job done.
It was nice working in 2.2.2.0
|
|
1861 | QCAD (main) | Bug Report | Low | Modify > Stretch: block references inside stretch box a ... | Closed | |
|
Task Description
I know that I can’t stretch a block in Model space but a block completely inside a Blocks should move. It doesn’t works that way in 3.22.0.3
|
|
2058 | QCAD (main) | Bug Report | Low | Modify > Move, Rotate, ...: "Use current layer and attr ... | Closed | |
|
Task Description
If I use the mentioned option and do an undo all entities will stay on the previously chosen target (current) Layer - the layer restoration fails.
Example: entities on layer x, current Layer y, select entities, Move/Copy MV, reference, drag to new position, Dialog option “Use current Layer and attributes” checked, OK, Undo
|
|
1081 | QCAD (main) | Bug Report | Low | Modify > Explode: Fails for dimension entities | Closed | |
|
Task Description
Exploding a usual block - no problems. Exploding a dimension - it will freeze the explode tool until I reset the tool or use another tool. New drawing / old drawing doesn’t matter.
|
|
1217 | QCAD (main) | Bug Report | High | Modify > Explode: crash for non-explodable entities | Closed | |
|
Task Description
- Select line - Modify > Explode
|
|
1991 | QCAD (main) | Bug Report | Low | Modify > Divide: Preview indicator fails on infinitive ... | Closed | |
|
Task Description
Case: Infinitive line, launch Divide (DI), click infinitive line
An orthogonal preview line should now indicates where the cut will happen when the next point is chosen. QCAD version 3.23.0.5 displays that indicator below a variable angle to the infinitive line. Regardless what it shows - the cut will happen orthogonal.
|
|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2026 | QCAD (main) | Bug Report | Low | Modify > Clip to Rectangle: fails on blocks | Closed | |
|
Task Description
Clip to Area = deletes whole blocks Clear Area = deletes whole blocks Cut at Area Boundary = deletes whole blocks
It was working before e.g. in QCAD Version 3.18.0
|
|
1151 | QCAD (main) | Bug Report | Low | Modify > Chamfer / Round: broken between first and last ... | Closed | |
2 |
Task Description
At closed Polygons: Chamfer / Bevel / Round tools are not proper working at the Start/End corner transition.
see also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3192&p=11358#p11358
|
|
2334 | QCAD (main) | Bug Report | Low | Modify > Break Out Segment: Line Selection Mode fails o ... | Closed | |
|
Task Description
no task description |
|
1325 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: trims to invisible entities | Closed | |
|
Task Description
“Autotrim” ignores status on invisible and/or blocked layer and will still trim along invisible entities.
|
|
1272 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: not undoable when used on spline | Closed | |
|
Task Description
Scenario 1: like to use “Breakout segment” on a spline, Status bar tells me that I CAN use this tool on a spline, Breakout: works, Undo: works, Everything fine ...
Scenario 2: like to use “Breakout manual” on a spline, Status bar tells me NOT to use this tool on a spline but ... Breakout manual: works, Undo: works, I think just the status bar needs an Infotext update.
Scenario 3: like to use “Auto Trim” on a spline, Status bar tells me NOT to use this tool on a spline but ... Auto Trim: works, Undo: works NOT, I think the status bar needs an Infotext update and I guess in the undo function is a bug.
|
|
1720 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: fails for Rays and Infinite Lines | Closed | |
|
Task Description
... if other entities involved.
Testdrawing: Please use the Auto Trim tool first with visible and then with invisible Block Countertop. The effect can change depending on where you click.
|
|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
2396 | QCAD (main) | Bug Report | Low | Missing Dim/Label Format information from an extern wri... | Assigned | |
|
Task Description
Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556
The attached example file is written with a third party CAD program in R15. Opened in QCAD CE all Dim/Label information are available. If I load this drawing in QCAD Pro the Dim/Label information are lost.
If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.
|
|
2005 | QCAD (main) | Bug Report | Low | Missing dialog in Command Line for "Create Block from s ... | Closed | |
|
Task Description
Bugreport filled on behalf of John Hyslop / QCAD forum member.
If launching the Menu / Block / “Create Block from selection” tool the usually used Command Line dialog to prompt to the next required action is missing. The Status bar is properly calling for “Reference Point” etc.
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=6762
|