QCAD Bugtracker

... for the Option bar.

Hi,

if I create in a new drawing a layer list and use the Show all Layers / Hide all Layers function everything works as expected.

If I hide one or more Layers individually and directly in the Layer List (click on the Eye) I can’t make them visible with the Show all Layer function. It looks like individual hidden Layer are protected with a higher priority.

If I load an “old” drawing all individual settings for a hidden Layer are with a higher priority than Show all Layers. If I click every single Eye for each Layer to make them visible then I’m again able to toggle the visibility for all Layer in once.

Case:
Existing Leader with Arrow status “yes” in drawing,
launch “Convert Drawing Unit”,
convert drawing unit,
Leader status for Arrow “yes” is now changed to “no”,

Case:
Drawing in mm with Entries in the View List,
Convert (CU) drawing from mm to inch,
View List still exist but has lost the coordinates for each defined window,

Hi,

often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.

Example:

Existing Layer

Layer name: Lot 47 area existing

Attributes

Color: Red

Lineweight: 0.35

Linetype: Dashed

New Layer

Layer name: Lot 47 area proposal

Attributes

Color: Blue

Lineweight: 0.35

Linetype: Dashed

Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” ....

The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...

A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.

I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing.
The new Layer itself is “empty” like any other new Layer.

Hi,

if I use the “Print current view” tool for a Landscape format - everything works just nicely!
If I use it for a Portrait print - the scale is way of.

For this example I used a rectangle as reference. The details what I’m looking for are captured with same sized red rectangles. The Paper orientation was changed before I used the Print command. To have the maximum view I select the rectangle and used “Zoom to selection” - then Print to current view.

Portrait, scale way of:
Husky-2017.09.25-03.png

Portrait, manual adjusted - it should look close to this one:
Husky-2017.09.25-04.png

I attache for testing the dxf too.

The Selection Filter doesn’t works proper with a Line / Continuous combination. Example drawing has Linetype by Layer and not by Layer

Filter
Entity type: Line
Property: Linetype
Comparison: = (is)
Value: Continuous

... doesn’t finds what I have ask for.
Husky-2017.10.05-04.png

Filter
Entity type: Line
Property: Linetype
Comparison: ≠ (is not)
Value: Continuous

... finds more than that what I have ask for.
Husky-2017.10.05-03

This bugs me since a long time but I wasn’t able to reproduce it ..... till now!

My Dim Label font for new drawings (Application Preferences) is set to “Helvetica-Bold” Basically it was working just fine for new drawings but from time to time, after saving and reopen my drawing, the font was lost and replaced by “Standard”. No idea why!

Today I was playing with the new QCAD Feature “Default Template” and learned that I loose all the time my preselected font. QCAD ignores that my Template “Drawing Preferences” and also the “Application Preferences” are set to “Helvetica-Bold”. It will be replaced by “Standard”. Annoying!

Ok, question was why it doesn’t happened with all drawings, all the time?
After many tests ....
The “old” blank Template opens with the correct font setting. If I use a Dim in the drawing and save it everything works as expected.
If I save the drawing without a Dim in it then the preselected Font will be replaced by “Standard”. It happens also if I delete all Dims in a so far proper working drawing - save and reopen it leads to the same issue. The Font will be replaced by “Standard”.

The new feature “your own Default Template” will not work regarding the Dim Label font in any cases - the template itself needs at least one Dim in the drawing to keep the desired Font.

Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.

Case:

1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block
= scale and rotation works as expected.

2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,

change scale setting = works as expected on view and frame,

change rotation = works on view BUT NOT ON VIEWPORT FRAME.

Blank QCAD template used as the start drawing.

Application Preferences / Dimension Settings

Text hight doesn’t accept anymore input 3.5/25.4 and it will change that in a new drawing to “0” instead to show 0.137795

If I remember correctly: Marked for “Keep proportions” = unchecked in new drawing is desired behavior, correct?

My settings below Application Preferences:
Dimension Settings
Drawing Unit: Inch
Paper Unit: Inch
Measurement System: Imperial

Printing - Page
Page Orientation: Landscape
Paper size: ANSI A (Letter)
Paper width: 8.5” Paper height: 11”

Printing Colors
Color Mode: Black / white

Blank QCAD template used as the start drawing.

Issue in Layout Block

Printing Color Black/White changed to “Full Color Mode”,
Default setting to use ANSI A will change to ISO A4 in mm regardless that the Paper Unit is inch and size ANSI A.
Unit is unstable when you change the format a few times. It will switch between mm and inch what can lead to a 8.5 mm x 11 mm Paper size (then called customized!) or 210” x 297” ANSI A4,

Paper orientation preset to Landscape is then Portrait in Layout Block

Case

delete a Layout Block in Block List - name e.g. ANSI A P,
create a new Layout Block - try to use the deleted name (ANSI A P) again and it will be declined because the “Layout already exists.

Case:
Settings are:
General: Drawing Unit
Drawing Unit: Foot
Paper Unit: Inch
Measurement System: Imperial

Dimension Settings: Architectural

Issue:

I draw a horizontal line 12 units (foot) long,
Use then the Horizontal DIM tool and it will display a measurement of 1’ = false,

I draw a horizontal line of 2 units (foot)long,
Use then the Horizontal DIM tool and it will display a measurement of 2” = false,

I assume the input for the line length is handled from the DIM tool as inch and not as feet.

... impossible to chose a scale in the DIM option bar.

Not sure: Bug or feature request. However - it’s right now confusing

It would be nice if the scale format list would respond to the “Measurement System (for line types and hatch patterns)” setting.

If my setting is Metric:

1:1

1:2

1:5 etc etc

If my settings is imperial:

1”=1”

1”=2”

1”=4” etc etc

Case:
Line / Lineweight 2mm
Model_Space Print Preview off / previously used scale was 1:1
Viewport 1:10
Paper_Space Print Preview scale 1:1
I’ll use the Paper_Space for a print:
Works as expected. A 2 mm Line will be printed in 2 mm

__

Line / Lineweight 2mm
Model_Space Print Preview off / previously used scale was 1:10 (closed Preview will keep it in memory),
Viewport 1:10
Paper_Space Print Preview scale 1:1
I’ll use the Paper_Space for a print:
Works not as expected! The Model_Space Print scale is used for scaling the 2 mm Line in the Paper_Space/Viewport. The Line will be printed with a 20 mm wideness.

Tested with checked / unchecked button for proportional scaling - but it doesn’t matter.

Print option “Auto fit pages to drawing” broken.

... if other entities involved.

Testdrawing:
Please use the Auto Trim tool first with visible and then with invisible Block Countertop. The effect can change depending on where you click.

QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page.
(Menu → Help → FAQ‘s (Online))

FR - Ok,
DE - Ok,

EN - not OK. Main text is in english, menu is in german.

Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1.
Drawing 1:1
First Viewport / scale 1:1 / inserted in Paper Space = everything fine,
Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.

... can’t find Block References if the Block which contains the Block References (Attributes) isn’t selected prior with the mouse.

The Selection Filter will find the Block References regardless which block is chosen in the Block List.

If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created.
I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.

Screenshot:
Clipboard content = circle

1. First insert

Restriction horizontal

2. Second insert

Please see also http://www.qcad.org/rsforum/viewtopic.php?f=32&t=5745

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),

Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block,
I choose Layout4 - the Viewport is placed on Layout2,

next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

I know that I can’t stretch a block in Model space but a block completely inside a Blocks should move. It doesn’t works that way in 3.22.0.3

Case: My last “Print preview” setting was “Multiple Pages” = 4
QCAD will remember this setting until I change it.

If I then - maybe days later - start a “Print current view” out of my drawing then QCAD will show me the current view on ONE page. Exactly what I expected. If I start the print QCAD will print on FOUR pages regarding to the last “Print preview” setting. Not what I was looking for ....

Now knowing what will happen I launch “Print current view”, see my current view on ONE page, launch the “Drawing preferences”, see that FOUR is the number for pages, doesn’t change anything and cancel the dialog. NOW I can see that FOUR pages are used for the current view print.

That is confusing and it would be nice to have somehow more control over this behavior.

Scenario:

launch BE / Edit contents of selected block,
Pencil symbol shows that this block is now in edit mode,
launch Rename Block / rename it, confirm with ok, dialog closes,
renaming doesn’t works, pencil symbol is still on that block,
try to launch rename block again - doesn’t work anymore,
return to main drawing,
if I then select this block it will show the new name in the Property editor but not in the block list,
if I try to open this block within the block list again it doesn’t works,
if I open this block within a double-click in my drawing it will open but the pencil isn’t shown.

Now I try the third time to post this .... .... deleted by “wrong token”???????
However ...

Regarding to the online tutorial:

quote:
Opening a CXF Font for Editing

To load an existing CXF font file in QCAD to view and edit its glyphs, simply use the menu File > Open and choose the format filter “CXF Font Files (*.cxf)”. Then choose the font file you want to open. The fonts that come with QCAD are stored in directory “fonts” of your QCAD installation.

quote end

Editing the cxf font in the original QCAD font folder will lead to a error message triggered by the Autosave function:

File access error: “C:/Program Files/qcad-3.22.1-pro-win64/fonts\~~Husky_test_font.dxf”. Access is denied.
[15:34:58] Autosave failed: C:\Program Files\qcad-3.22.1-pro-win64\fonts\~Husky_test_font.dxf

Note: Windows will not save anything in a system folder and the process is terminated by windows.

Solution: Move the cxf font for editing from the QCAD folder to a unprotected folder like Documents/drawings.
After editing is done move it back to the QCAD font folder.

QCAD 3.23.0.2
File / New from Template fails in different situation like immediately after launching the tool, sometimes after changing directories in the dialog like from imperial to metric etc..
QCAD tries for ever (wait cursor) or even quits QCAD. It’s not a clear pattern ...

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6585

3.23.0.2 doesn’t works
3.23.0 works

Reported on Ubuntu 19.4, Win10

3.23.02 Block toggle switch for visibility fails.
3.23.0 Block toggle switch for visibility works.

QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected.
Tested the issue back to QCAD 3.18 - no version is able to save those file types.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980

Snapshot 3.23.04

Spacing for symbols in layer list way to wide compared to previous versions.

Version 3.23.03 - Husky-2019.10.22-02.png
Version 3.23.04 - Husky-2019.10.22-01.png

Drawing created with a previous QCAD version has issues to be correctly displayed in the current snapshot.
e.g. drawing opened in QCAD 3.23.0 - works flawless.
same drawing opened in QCAD 3.23.4 - has problems to show inserted blocks correctly.

https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6660

Cases:

1. QCAD default start drawing:
Application Preferences, Page Tags enabled,
Load new drawing (Menu/File/New),
Launch Print Preview, Page Tags not displayed on print preview page,
Check Drawing Preferences shows that Page Tags are still enabled, turn it off, turn it on, confirm with OK makes the Page Tags visible on the Print Page.

2. Customized start template drawing - saved as template with enabled Page Tags - same behavior.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6673

QCAD Pro, Deutsche Benutzeroberfläche:

Kommando Zeilen Mitteilung:
[13:35:12] Automatisches Speichern in: C:\Users\......xxx.dxf...
[13:35:12] Autosave abgeschlossen.

Englische und Deutsche Benutzeroberfläche:
Die angezeigten 3 Punkte nach dem xxx.dxf sind überflüssig da die Zeile nach dem dxf definitive endet.

Case:
Infinitive line,
launch Divide (DI),
click infinitive line

An orthogonal preview line should now indicates where the cut will happen when the next point is chosen.
QCAD version 3.23.0.5 displays that indicator below a variable angle to the infinitive line. Regardless what it shows - the cut will happen orthogonal.

If I insert a bitmap the relative zero point (RZ) isn’t set at all. It will be set at the mouse position in the moment when I terminate the tool.

This leads among other things that I can’t use the Alt key for ortho mode or other tools for restrictions.

If I use accidentally explode on a ray or infinitive line the line will be deleted without a warning.

QCAD 3.23.0.5

1. If I use accidentally explode on a bitmap it will be deleted without a warning.

2. If I select an area with a selection rectangle as preparation for the “Clip to rectangle” tool all bitmaps within the selection are deleted - without a warning.

QCAD 3.23.0.5