|
1217 | QCAD (main) | Bug Report | High | Modify > Explode: crash for non-explodable entities | Closed | |
|
Task Description
- Select line - Modify > Explode
|
|
369 | QCAD (main) | Bug Report | Medium | "Edit Text" Function fails ... | Closed | |
|
Task Description
3 RC1b
Trying to edit a Text calls the Qt Script Debugger with following Message:
Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText 170 simpleText.checked = textDataIn.isSimple();
I’m able to close the Script Debugger but I can’t edit the Text ....
|
|
389 | QCAD (main) | Bug Report | Medium | Changes in "Shortcuts and Commands" are not storable... | Closed | |
|
Task Description
You can’t save changes in “Application Preferences > Shortcuts and Commands”! It works only for the current session - after a restart the settings are back on default
|
|
352 | QCAD (main) | Bug Report | Low | Info Tool, Polygonal Area shows decimal units instead o ... | Closed | |
|
Task Description
Drawing preferences / dimension = Fraction
Info Tool, Polygonal Area shows decimal units instead of fractions.
|
|
353 | QCAD (main) | Bug Report | Low | Relative Angle / Line Orthogonal caused malfunction in ... | Closed | |
|
Task Description
After using Line “Relative Angle” or “Line Orthogonal” the Toolbar is in a loop without showing all the Cad tools such as “Modify” “Hatch” etc.. Escape switch only between the “Lines Menu” and the “Select Menu”. To get all Cad Tools back you have to restart QCad.
|
|
354 | QCAD (main) | Bug Report | Low | Property Editor / Select Layer Malfunction | Closed | |
|
Task Description
RC1b To change the postfix for dimension. Situation: New drawing, Dimension in Drawing, Dimension on one Layer. Menu > Select > Select Layer and click on a dimension. Went to Property Editor > Geometry > Label and change the Label in <>”. Nothing happens.
The same procedure with a other kind of selection works and it works also in the 2.2.2.0
|
|
363 | QCAD (main) | Bug Report | Low | Modify tool "Stretch" only one time ... | Closed | |
|
Task Description
3.0 RC1
The Stretch Tool works only for one task and than you have to reselect it again for the next task. Who really works with the stretch tool has to use it (often) a couple times consecutively to get the job done.
It was nice working in 2.2.2.0
|
|
473 | QCAD (main) | Bug Report | Low | Move, restricted horizontal, intersection .... | Closed | |
|
Task Description
Move/Copy doesn’t work with the combination restricted horizontal and snap to intersection manually.
|
|
479 | QCAD (main) | Bug Report | Low | Fehler in der Textfunktion | Closed | |
|
Task Description
Textfuntion:
Rufe ich die Funktion “Text” auf und schreibe einen Text wird dieser unwiderruflich gelöscht bzw. durch einen vorherigen Text ersetzt wenn ich danach etwas im “Main Font” verändere. “Text Geometry” und “Alignment” funktioniert.
|
|
492 | QCAD (main) | Bug Report | Low | Snap to intersection manual in block references | Closed | |
|
Task Description
Wenn ich versuche einen Block zu verschieben mit dem Ziel “Intersection manual” wird nicht die im Block ausgewählte Linie benutzt sondern alle im Block befindlichen Linien die eine “Intersection manual” ermöglichen würden.
Auch die visuelle Auswahlerleichterung einer Linie (Farbe ändert sich beim drüberfahren mit der Maus) wird im Block nicht unterstützt :(
|
|
542 | QCAD (main) | Bug Report | Low | Snap > Restrict horizontal cannot be applied to Snap > ... | Closed | |
|
Task Description
Vorgabe: Kreis der verschoben werden soll auf einen Punkt zwischen zwei Vertikale Linien.
Auswahl des Kreises, Funktion Verschieben/Kopieren, Referenzpunkt = Mitte Kreis, Zielpunkt Middle Manuel, Erster Punkt = Center 1. vertikale Linie, Zweiter Punkt restricted Horizontal zum ersten Punkt, QCad benutzt nun fälschlicher Weise den Referenzpunkt des Kreises anstatt den Center der bereits gewählten 1. vertikalen Linie ....
|
|
543 | QCAD (main) | Bug Report | Low | Unit Konvertierung bei Blocks funktioniert nicht ... | Closed | |
|
Task Description
Wenn ich eine Zeichnung in mm als Grundlage benutze um über die Zwischenablage etwas in eine Inch Zeichnung zu übernehmen wird alles Maßstäblich in Inch konvertiert. Sehr schön
Wenn ich aber einen Block der in einer mm Zeichnung erstellt wurde über die Zwischenablage in eine Inch Zeichnung kopiere wird die Kopie als solches in der Zeichnung auch wieder in Inch konvertiert - der Block wird aber abgelegt in 1mm = 1” und kann unbearbeitet nicht weiterverwendet werden. Nicht schön
Natürlich kann man jetzt fragen: Wer braucht solch einen Blödsinn? Antwort: Amerikaner! In den USA wird blödsinniger weise gemixt .....
|
|
553 | QCAD (main) | Bug Report | Low | Auswahlbox ignoriert bestimmte Bemaßungen mit geänderte ... | Closed | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox wird bestimmte (nicht alle) Bemaßungen ignoriert welche geänderte Label haben. In meinem Fall z.B. <>” (reality check)
|
|
557 | QCAD (main) | Bug Report | Low | In Blöcken kann am Kreis kein Reference Punkt als Fang ... | Closed | |
|
Task Description
In Blöcken kann am Kreis kein Reference Punkt als Fang benutzt werden. Alle anderen Punktbestimmungen scheinen zu funktionieren.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
585 | QCAD (main) | Bug Report | Low | Copy & Paste Vorschau Proportionen passen nicht ... | Closed | |
|
Task Description
Kopiere ich Bemaßungen/Leader in die Zwischenablage und möchte diese dann wieder in die Zeichnung einfügen passen die Vorschau Proportionen nicht mit dem eingefügten Ergebnis überein. Eigentlich nur ein Schönheitsfehler aber es erschwert die korrekte Positionierung und die benutzung der Optionen wie skalieren, rotieren etc ...
|
|
597 | QCAD (main) | Bug Report | Low | Rechteck, Referenspunkt nicht mehr wählbar in kombinati ... | Closed | |
|
Task Description
Will ich ein Rechteck mit Größenvorgabe zeichnen und kombiniere dies mit einem versetzten Relative Zero Punkt kann ich nicht mehr den Referenzpunkt (unten Links etc.) wählen und in der Vorschau sehen. Gezeichnet wird es richtig - wenn ich den Vorgang abschließen kann!
Fallbeispiel: Rechteck mit Größe, verändern Relativ Zero, Ende eines anderen Elementes, Relativ X,Y, Will ich dann den Referenzpunktes des Rechtecks verändern - hat QCad Probleme dies umzusetzen oder auch den Vorgang dann flüssig durchzuführen.
|
|
627 | QCAD (main) | Bug Report | Low | Text: Falsche Info beim editieren der Formatierung ... | Closed | |
|
Task Description
Grundsätzlich finde ich die Optionsauswahl beim erstellen oder editieren eines Textes im “Text Option Window” als sehr Komfortable.
Trotzdem gibt es hier für mich noch einige Ungereimtheiten die ich als Bug bezeichnen würde da es untypische Informationen liefert und verwirrt.
QCad, English, XP, Text Optionen Window: Im linken Bereich gibt es den sogenannten “Main Font”. Dieser kann aber nicht unter Application/Drawing preferences vorgegeben werden, richtig? Hier würde ich mir wünschen das ich diesen vorgeben kann und es somit ein “Default Font” wäre. Für Bemaßungen benutze ich z.B. eine Vorgabe von 0.137795276 inch (= Deutsche DIN 3.5mm für Texthöhen) und bin Heilfroh das ich dies als Default vorgeben kann ;)
Im rechten Bereich des Text Options Windows kann ich im “Rich Text” Tab den Text formatieren - grundsätzlich eine schöne Sache. Leider verwirrt mich dieses Fenster immer wieder: Fallbeispiel: Text erstellt, individuell formatiert(Textfonts, Höhe, Farbe), positioniert in der aktuelle Zeichnung. Doppelklicke ich den Text um ihn zu editieren poppt das Optionsfenster auf und der Text ist markiert. Im Text font wird mir gesagt das es der Text Arial ist mit einer Höhe von 1 und schwarz. Da ich aber NICHT Arial verwendet habe und die Texthöhen unterschiedlich sind und alles in rot ist dies eine falsche Information. Hier hätte ich erwartet: Font = *VARIES*, Höhe = *VARIES*, Farbe = *VARIES*. Klicke ich dann mit der Maus in den Text (Markierung verschwindet, Cursor blinkt im Text) habe ich immer noch die selbe Info - erst ein zweiter Klick spuckt dann die richtige Info aus.
Zurück zum Main Font: Wie nutze ich diesen wenn ich bereits andere Formatierungen verwendet habe - neu eingeben? Gutes Gedächtnis vorausgesetzt Spaß bei Seite: Sollte dies nicht eine Vorgabe sein die “auf Knopfdruck” verwendet werden kann?
Und da ich neugierig bin .... wofür ist die Option “Simple Text”?
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
715 | QCAD (main) | Bug Report | Low | Tangent Warning Messages are wrong ... | Closed | |
|
Task Description
Task: I like to draw a line tangent between two circle.
I choose the line/tangent tool - click the first circle - get a Warning Message: “No tangent possible” confirm the Message with the OK Button. Choose the second circle - get again a Warning Message: “No tangent possible” confirm also this Message with the OK Button.
Result: A line tangent between two circle ......
|
|
717 | QCAD (main) | Bug Report | Low | Create Library Item from selection doesn't takes the ch ... | Closed | |
|
Task Description
Tool “Create Library Item from selection” doesn’t takes the chosen Reference point ....
It seems that QCAD takes something around the absolute Reference by 2 times ..... ???
|
|
722 | QCAD (main) | Bug Report | Low | Mouse wheel zoom .... | Closed | |
|
Task Description
XP 32
Vers. 3.0.0 Mouse zoom in and out with the Mouse-wheel = nice and smooth ;)
Vers. 3.0.5 Mouse zoom in and out with the Mouse-wheel = jumping zigzag ways during it zooms .... :(
|
|
737 | QCAD (main) | Bug Report | Low | Block with Circle - can't snap to ... | Closed | |
|
Task Description
XP32 / QCAD 3.0.5
Block with Circles - can’t snap to “Reference”, Intersection.
|
|
738 | QCAD (main) | Bug Report | Low | Lost Layer and Block List caused by closing the empty " ... | Closed | |
|
Task Description
XP32 / 3.0.5
Example case: I open QCAD and I have automatically the “Untitled 1” drawing. If I open now an additional, saved drawing I have all Blocks and Layer listed and I’m able to work normal with my drawing ... If the “Untitled 1” drawing is NOT the active drawing and I close it with the X in the Tab I will lose the Layer and Block List (only the List!) in the other drawing ....
I have to play around with QCAD “Window minimizing” “Draft mode” or I have to reopen the drawing to get the Layer/Block List back! Seems to be a refresh problem .....
Funny is that this not occurs if I have opened a couple drawings .... but in this case I’m able to switch (and refresh?) the drawings with the tabs ....
|
|
740 | QCAD (main) | Bug Report | Low | Draw - Arc - Two Points and Radius: wrong console outpu ... | Closed | |
|
Task Description
XP/32 QCAD 3.0.5
... after picking the first Point a wrong message appears what says: “Warning: The two points are identical”
|
|
742 | QCAD (main) | Bug Report | Low | Autosave weird behavior ... | Closed | |
|
Task Description
QCAD 3.0.5
Case: Start QCAD → Went to the Menu → File → Open recent → choose a Drawing out of the List → click to open this existing drawing. Message windows appears: QCAD found an Autosave drawing .... will you open it? I choose NO!!! I go back to the Menu → File → Open recent → will choose the same Drawing .... but it is not anymore listed!!! Ok - I’m not lazy ... ... back to the Menu → File → Open → find the original file on my Hard drive → click to open it and get the Warning Message: “Can not open the File ...... Please check your access rights bla bla bla....”
Question: In this case I’m only able to open the bak file and “Save as” under the old name to get my starting situation back ...? Just because I said “NO” to load the Backup File in first place ... ?
|
|
744 | QCAD (main) | Bug Report | Low | QCAD 3.0.5 instable ... | Closed | |
|
Task Description
XP32/ QCAD 3.0.5
The 3.0.5 Version is very instable - crashes many times in an hour
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe ModVer: 0.0.0.0 Offset: 00de468d
|
|
749 | QCAD (main) | Bug Report | Low | QCAD 3.0.6 / 3.0.7 autosave crashes | Closed | |
|
Task Description
XP32/ QCAD 3.0.6
The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ...
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll ModVer: 4.7.4.0 Offset: 0005d1e8
|
|
751 | QCAD (main) | Bug Report | Low | Dimension Leader: Arrow attribute | Closed | |
|
Task Description
XP/32 QCAD 3.0.0
If I try to change the Attributes of a dim leader it doesn’t works.
Leader → Option Arrow head - marked or not - no impact - always with arrow,
Property editor: Geometry of leader, Arrow: yes or no - doesn’t changed anything, Vertex: Index Number doesn’t change anything,
|
|
753 | QCAD (main) | Bug Report | Low | Paste Preview confusing .... | Closed | |
|
Task Description
If I paste something from the clipboard to a drawing the scales of dims are wrong in the preview.
It is difficult to place it right with a confusing preview of that what I have to place ...
|
|
755 | QCAD (main) | Bug Report | Low | Text: Redundant Infos if I customize the Text hight .. ... | Closed | |
|
Task Description
If I customize the Text height I get redundant Infos for the Contents...
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
759 | QCAD (main) | Bug Report | Low | Button "Flip Block" doesn't remains Highlighted ... | Closed | |
|
Task Description
Insert Block:
If I use the “Flip Block” option (Horizontal and/or Vertical) the Buttons doesn’t remains Highlighted. It should remain Highlighted ...
|
|
791 | QCAD (main) | Bug Report | Low | Info Tool Polygonal Area closing with right mouse click ... | Closed | |
|
Task Description
3.0.8 Setting: Application Preferences - Widgets - Command line - Show information as dialog: Ticked!
If I use the Info Tool Polygonal Area and decide to close it with a right mouse click the “Show information” dialog window pops up - just as expected. If I close the Dialog window with the OK Button .... a “CAD Tools” Menu pops up. Not expected
By the way - any chance to control the number of digits after the decimal point in the Info dialog window? 15 decimal places are most of the time just to much!
|
|
811 | QCAD (main) | Bug Report | Low | Rectangle(RE) with a defined x,y coordinate start point ... | Closed | |
|
Task Description
QCAD 3.0 / 3.1
Test case: set relative zero, choose rectangle RE tool, choose snap tool coordinate, Now QCAD is asking for the x,y coordinates and my thinking was it will just use them for the start point (what I’m looking for!) - but .... QCAD will use the given coordinates for the Start point of the rectangle(right!) AND as size for the rectangle(wrong!)
|
|
812 | QCAD (main) | Bug Report | Low | Wrong Alert messages ... | Closed | |
|
Task Description
3.1 Beta / XP32
Two Points (C2), Two Points and Angle (A2), Two Points and Radius (CD), ONE Mouse-click = Alert message: “The two points are identical”
Tangent two circles (LT2), Click on first circle = Alert message: “No tangent possible”, Click on second circle = Alert message: “No tangent possible”
|
|
838 | QCAD (main) | Bug Report | Low | Grid settings are not taken over ... | Closed | |
|
Task Description
If I do my Grid settings - there are not correctly taken over in existing or new drawings.
Some kind of multiplication?
|
|
843 | QCAD (main) | Bug Report | Low | Can't snap to reference point of a block reference | Closed | |
|
Task Description
If I need to move etc. a block regarding to his reference point - I’m not able to snap to the reference point All other snap points are appear as just fine working ...
|
|
846 | QCAD (main) | Bug Report | Low | Auto Trim at an arc ... | Closed | |
|
Task Description
If I have to “Auto trim” a line between to construction (or what ever ) lines the Auto Trim function works as expected!
If I use the same constellation with an arc the Auto trim function will give me an uncontrolled, unexpected result
|
|
852 | QCAD (main) | Bug Report | Low | Circle hatch undo not correctly working .... | Closed | |
|
Task Description
Task: Selected “all” (Circle + Hatch) Move / Copy tool, Reference, move/copy, place, KEEP ORIGINAL, OK, Undo, Works!!!
Same scenario but DELETE ORIGINAL, Undo, Doesn’t works correctly!
|
|
861 | QCAD (main) | Bug Report | Low | Widgets blends to early in ... | Closed | |
|
Task Description
I don’t know: Bug or Feature request ....
Example: If I move the “Library Browser” with the mouse closer than ~63px to the top corner it will go to blend in. Undo doesn’t works in this case - so I have to pull it out and re-size the widget.
Usually it should blend in if I’m over the bar or at least I have to be much closer to the corner - or not?
|
|
862 | QCAD (main) | Bug Report | Low | Dimension settings - "Keep proportion" setting can't be ... | Closed | |
|
Task Description
XP 32/ QCAD 3.1.6
Drawing Preferences - Dimension settings - “Keep proportion” setting changes will not be saved with the Drawing.
Maybe you have to try it a couple times with the same drawing
|
|
863 | QCAD (main) | Bug Report | Low | "Auto Zoom" is aligned also on invisible blocks ... | Closed | |
|
Task Description
If I switch a Block to invisible and use then the “Auto Zoom” in my drawing - the zoom cutout will appear like the block would still be visible
Attachment: 1. “Auto Zoom” (Z, A) / Visible Block 2. “Auto Zoom” (Z, A) / Invisible Block
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
865 | QCAD (main) | Bug Report | Low | Invisible Blocks are causing a warning Window ... | Closed | |
|
Task Description
If I use in an area with invisible Blocks the “rectangular selection” in “lower left to upper right” direction for a move/copy, mirror, clipboard etc. action - a warning window appear. Also the reference points of the invisible blocks are visible.
If I use the “rectangular selection” in upper right to lower left direction everything works as expected.
|
|
870 | QCAD (main) | Bug Report | Low | Isometric projection of text creates unwanted bounding ... | Closed | |
|
Task Description
If I use the isometric tools for a text QCAD will keep a construction Box as a leftover ...
|
|
887 | QCAD (main) | Bug Report | Low | Wrong warning window with area selection ... | Closed | |
|
Task Description
Lower left to upper right selection which includes invisible blocks causes warning window if I try to use the clipboard “copy” or “cut” function:
“Trying to draw on or modify entities on a locked or invisible layer”
... but it works!
Upper right to lower left selection over all doesn’t calls the warning window!
|
|
891 | QCAD (main) | Bug Report | Low | Block - Create Library item: unit / reference point pos ... | Closed | |
|
Task Description
Created library item does not have the same unit as source drawing. Zero point is not at chosen reference point.
Vers. 3.2.1, Drawing Unit “inch”!
... it takes the absolute 0 point as reference.
Millimeter works fine!!!
Rest of the units .... I don’t know
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|