|
725 | QCAD (main) | Bug Report | Medium | Inserting items from part library may create invalid bl ... | Closed | |
|
Task Description
To reproduce: - Create a part library item with file name “Test1 .dxf” (note the space at the end of the base name) - Insert this part library item into a blank drawing - Try to save the drawing - Error “Invalid Symbol Table Name” occurs
|
|
847 | QCAD (main) | Bug Report | Medium | Info - Distance PP, EP: ruler ticks too dense | Closed | |
|
Task Description
Info tools show too many ticks which leads to slow down / crash.
|
|
872 | QCAD (main) | Bug Report | Medium | Crash in dwg2svg | Closed | |
|
Task Description
Conversion of certain files leads to crashes (segmentation fault).
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2501
|
|
917 | QCAD (main) | Bug Report | Medium | Integrated help not working | Closed | |
|
Task Description
Help - Reference Manual does not have any effect on Windows.
|
|
953 | QCAD (main) | Bug Report | Medium | Crash while rendering dashed lines with zero length | Closed | |
|
Task Description
Line pattern factor for zero weight lines defaults to 0 which can lead to division by zero.
|
|
954 | QCAD (main) | Bug Report | Medium | Coordinates entered are interpreted as direct distance ... | Closed | |
|
Task Description
Entering a coordinate (e.g. 20,20) results in direct distance entry instead (angle from relative zero to mouse pointer, length 20).
|
|
970 | QCAD (main) | Bug Report | Medium | Unable to save file with leading / trailing spaces in l ... | Closed | |
|
Task Description
Layer and block names with leading / trailing spaces lead to exception when saving file through Teigha.
|
|
1018 | QCAD (main) | Bug Report | Medium | Crash when using Draw > Polyline > Trim Segments | Closed | |
|
Task Description
Draw > Polyline > Trim Segments crashes if QCAD is compiled using gcc 4.2.1 which is the case for the Mac OS X package.
|
|
1032 | QCAD (main) | Bug Report | Medium | Copy / paste: pasting copied block references results i ... | Closed | |
1 |
Task Description
- Copy two block references of block “circle” which contains one circle - Paste into new, empty drawing - Pasted block “circle” contains two circles
|
|
1047 | QCAD (main) | Bug Report | Medium | Preview does not use drawing settings | Closed | |
|
Task Description
See forum thread: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2909
|
|
1121 | QCAD (main) | Bug Report | Medium | Draw > Polyline > Append Node(s) broken | Closed | |
|
Task Description
Selecting the polyline is not possible. Possibly related to update of DrawPolyline tool.
|
|
1123 | QCAD (main) | Performance Issue | Medium | Hatch in block causes performance problem | Closed | |
|
Task Description
Hatches in blocks cause poor performance while (auto-)snapping. The lines that make up those hatches are included in the search for intersection points which is not desirable.
|
|
1167 | QCAD (main) | Bug Report | Medium | Aligned dimensions not displayed | Closed | |
|
Task Description
Aligned dimensions are not displayed correctly after loading. Definition point and text position are set to NaN.
|
|
1216 | QCAD (main) | Bug Report | Medium | DXF/DWG writing: block name mixup with anonymous blocks | Closed | |
|
Task Description
Anonymous blocks (with names starting with *, imported from other software) can be mixed up on writing.
|
|
1241 | QCAD (main) | Bug Report | Medium | Options tool bar fields not editable, no interaction wi ... | Closed | |
|
Task Description
Likely affects Windows Vista, 7, 8.
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3588 http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3587
Caused by update from Qt 4.7.4 to Qt 4.8.7
|
|
1268 | QCAD (main) | Bug Report | Medium | DXF/DWG import: cannot open file with custom linetypes | Closed | |
|
Task Description
If custom complex linetypes embedded in a file refer to a font that is not available for linetype shapes, the file cannot be opened.
Error: Can not open file Please check your access rights, file format and file extensions
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3718
|
|
1442 | QCAD (main) | Bug Report | Medium | Imported and saved dimensions reference empty blocks | Closed | |
|
Task Description
- Import drawing from other CAD application with dimension blocks (*D..) - Save file with QCAD - Dimension blocks are exported to drawing file but are empty which can break compatibility with other products
|
|
1657 | QCAD (main) | Bug Report | Medium | Edit > Drawing Preferences > Printing > Page: no effect ... | Closed | |
|
Task Description
Printer settings cannot be changed for model space.
|
|
1736 | QCAD (main) | Bug Report | Medium | Draw > Image: broken | Closed | |
|
Task Description
Draw > Image broken due to UI file resource not being found.
|
|
1737 | QCAD (main) | Bug Report | Medium | Block > Attributes > Define Block Attribute: broken | Closed | |
|
Task Description
Broken due to UI file resource not being found.
|
|
1773 | QCAD (main) | Bug Report | Medium | File > PDF Export / SVG Export / Bitmap Export: file na ... | Closed | |
|
Task Description
Configure QCAD to use native file dialogs Load file Export file as PDF, SVG, Bitmap File name suggested by file dialog is drawing file which means user might accidentally overwrite drawing file.
|
|
2054 | QCAD (main) | Bug Report | Medium | Misc > Modify > Flatten Drawing to 2D | Closed | |
|
Task Description
Crash when drawing contains viewports.
|
|
2200 | QCAD (main) | Bug Report | Medium | Linetype scale is wrong when scaling linetypes by linew ... | Closed | |
|
Task Description
All linetype patterns are displayed too large.
|
|
2559 | QCAD (main) | Bug Report | Medium | File > Open: dxflib preselected | Closed | |
|
Task Description
File > Open should not preselect the dxflib filter but All Files.
Caused by changed order of loading plugins.
|
|
2 | QCAD (main) | Feature Request | Low | PDF Export | Closed | |
|
Task Description
Add PDF export from print preview.
|
|
18 | QCAD (main) | Bug Report | Low | LineRectangleSize.js: options tool bar: alignment point ... | Closed | |
|
Task Description
Sometimes the popup widget that lets the user choose the alignment point for positioning the rectangle does not close when the user clicks the desired point.
|
|
21 | QCAD (main) | Feature Request | Low | Add line weight scale factor | Closed | |
1 |
Task Description
Required for extreme units such as Nanometers or Kilometers. See also FS#20
|
|
22 | QCAD (main) | Bug Report | Low | Improve grid info display for imperial units | Closed | |
|
Task Description
For inch, foot, .. the grid info display should for example display “1/128” instead of 0.0078125
|
|
33 | QCAD (main) | Bug Report | Low | Prints always to A4 | Closed | |
|
Task Description
Print prints always to A4, regardless of paper size chosen.
|
|
34 | QCAD (main) | Bug Report | Low | Printing tests | Closed | |
|
Task Description
Iterate through all drawings in a directory and create PDFs from them using the same mechanism as for printing.
|
|
42 | QCAD (main) | Bug Report | Low | Text Dialog: bold / italic main font | Closed | |
|
Task Description
bold / italic check box for main font has no effect
|
|
47 | QCAD (main) | Bug Report | Low | Print preview marks drawing as modified | Closed | |
|
Task Description
Print preview marks drawing as modified
|
|
48 | QCAD (main) | Bug Report | Low | Close drawing from print preview | Closed | |
|
Task Description
Fails if drawing was modified and user wishes to save drawing.
|
|
51 | QCAD (main) | Bug Report | Low | Text Dialog: remember last used settings | Closed | |
|
Task Description
Remember last used settings (text size, font, ...)
|
|
52 | QCAD (main) | Bug Report | Low | Property Editor: combo boxes | Closed | |
|
Task Description
Text entities show a field “Font Name” in the property editor. This should offer a font combo box to change the font.
Hatch entities show a field “Pattern/Name” which should offer a combo box with pattern names.
|
|
53 | QCAD (main) | Bug Report | Low | Text issues | Closed | |
|
Task Description
Done
Text with ‘standard’ font
|
|
56 | QCAD (main) | Bug Report | Low | Courier font collision | Closed | |
|
Task Description
Rename Courier.cxf font, correct courier in imported QCAD 2 files
|
|
58 | QCAD (main) | Bug Report | Low | SVG Export file name suggestion | Closed | |
|
Task Description
Quick SVG Export suggests file name “Untitled 1 [*].svg”
Remove [*] (comes from window title).
|
|
59 | QCAD (main) | Bug Report | Low | nested block inserts | Closed | |
|
Task Description
...display nothing (see auto generated example drawings)
|
|
65 | QCAD (main) | Bug Report | Low | Save as hotkey | Closed | |
|
Task Description
File - Save As has no hotkey under Linux (should be Ctrl-Shift-S)
|
|
66 | QCAD (main) | Bug Report | Low | Warnings to fix | Closed | |
|
Task Description
Fix warning on start: Warning: RGuiAction::getByScriptFile: no action found: “scripts/Snap/Coordinate/Coordinate.js”
|
|
70 | QCAD (main) | Bug Report | Low | 64bit | Closed | |
|
Task Description
ECMAScript engine (garbage collector) crashes on Mac OS X and Linux 64bit if QCAD binary is compiled as a 64bit binary.
|
|
76 | QCAD (main) | Bug Report | Low | PDF Export: add extension | Closed | |
|
Task Description
Add file extension .pdf automatically if omitted by user.
|
|
78 | QCAD (main) | Task | Low | Linux deployment: tar.gz | Closed | |
|
Task Description
if possible, extend create_makeself script to create a tar.gz in addition to the executable installer, so we have both in the end.
|
|
83 | QCAD (main) | Task | Low | Part Library - Find Files / Generate Files | Closed | |
|
Task Description
Create and extend part library.
Find Existing Files
Find files under a suitable license (e.g. creative commons) for inclusion into the QCAD part library:
DXF / DWG files
SVG files which we could convert to DXF with a command line converter or InkScape if possible.
DXF files produced from SVG / with InkScape contain a lot of polylines with small line segments which interpolate arcs and circles.
A ‘Convert Interpolating Line Segments’ tool could be used to convert line segments into arcs, ellipse arcs and circles.
for c in 0...number of nodes: create arc with v[c], v[c+1], v[c+2]
check if v[c+i] is also on arc for c+i<number of nodes
if n nodes have been found which are all on arc and all segments have almost the same length and are relatively small compared to the whole drawing, convert them to arc
A ‘Simplify Polyline’ tool could be used to remove nodes that don’t add a lot of information (almost straight connected line segments).
Parameterized Items
Parameterized items use XDATA to let the script behind know which entities need to be changed in which way.
The user can choose from all supported parameters shown in a table.
The user can choose from options:
Create dimensioning
Create auxiliary lines
Create center line
Scaling
Sectional drawing
Hatching space
Disadvantage compared to automatically generated items:
It is not possible to add an item with it’s parameters to favorites, e.g. some specific screw often used in a drawing. To make that possible, the parameters has to be saved, too.
Links
[mostly old] Generate Items Automatically
<!-- XML document defines a name template to use for the generated parts: -->
"DIN_912_M%1_L%2""din_912.js""DXF"
<!-- Attributes to use for the name template -->
"d"
"L"
<!-- For each type of the specific part, we define some parameters that
are identical for that type (here M3): -->
"3""5.5""2.5""3""18"
<!-- For each of these elements, a DXF file is generated. This DXF file
is generated with file name "DIN_912_M3_L22.dxf" and parameters d="3" D="5.5"
s="2.5" k="3" b="18" L="22": -->
"var1"
"var2"
"60"
"M4""7""3""4""3""20"
"var1"
"var1"
"22"
"25"
"30"
"35"
"40"
"45"
"50"
"var2"
"70"
|
|
86 | QCAD (main) | Feature Request | Low | Block arrays | Closed | |
|
Task Description
Support arrays of block inserts.
|
|
88 | QCAD (main) | Bug Report | Low | Duplicate menu | Closed | |
|
Task Description
Block - Explode
|
|
89 | QCAD (main) | Bug Report | Low | Open file from Finder (Mac) | Closed | |
|
Task Description
Double clicking a DWG file in Finder opens QCAD but not the file
|
|
95 | QCAD (main) | Feature Request | Low | Part Library: RDF | Closed | |
|
Task Description
Allow for multiple authors of one item.
This can be achieved by replacing the rs:author attribute of tag rdf:Description with:
"John Doe"
"Jane Doe"
|
|
96 | QCAD (main) | Feature Request | Low | SVG Import | Closed | |
|
Task Description
Complete SvgImporter.js and SvgImport.js
Implement SvgImporter.prototype.importFile to import the SVG file with the given fileName. Reading only all path data without any attributes or transformations is fine as a first step. SvgImporter.prototype.importFile() currently imports one hard coded path data as proof of concept.
Implement SvgImport.prototype.beginEvent() to show a file open dialog that lets the user choose an SVG file to import.
Support SVG as file format for part library items through SvgImporter
This should be enough to import any SVG file in library/symbols
|