|
1 | QCAD (main) | Bug Report | Very Low | Sample Task | Closed | |
|
Task Description
This isn’t a real task. You should close it and start opening some real tasks.
|
|
8 | QCAD (main) | Bug Report | Medium | Text Dialog: custom text height broken | Closed | |
|
Task Description
Custom text height cannot be set (enter closes the dialog, tab does not activate the entered text height)
|
|
18 | QCAD (main) | Bug Report | Low | LineRectangleSize.js: options tool bar: alignment point ... | Closed | |
|
Task Description
Sometimes the popup widget that lets the user choose the alignment point for positioning the rectangle does not close when the user clicks the desired point.
|
|
22 | QCAD (main) | Bug Report | Low | Improve grid info display for imperial units | Closed | |
|
Task Description
For inch, foot, .. the grid info display should for example display “1/128” instead of 0.0078125
|
|
33 | QCAD (main) | Bug Report | Low | Prints always to A4 | Closed | |
|
Task Description
Print prints always to A4, regardless of paper size chosen.
|
|
34 | QCAD (main) | Bug Report | Low | Printing tests | Closed | |
|
Task Description
Iterate through all drawings in a directory and create PDFs from them using the same mechanism as for printing.
|
|
42 | QCAD (main) | Bug Report | Low | Text Dialog: bold / italic main font | Closed | |
|
Task Description
bold / italic check box for main font has no effect
|
|
43 | QCAD (main) | Bug Report | Medium | Hatch ellipse | Closed | |
|
Task Description
cannot hatch single full ellipse
|
|
44 | QCAD (main) | Bug Report | High | Save might not save in last chosen format | Closed | |
|
Task Description
File - Save might not save in last chosen format but default format. E.g. if a file is saved as DXF R12, and then saved, check if the format is still DXF R12 and not the default DXF format (2010).
|
|
47 | QCAD (main) | Bug Report | Low | Print preview marks drawing as modified | Closed | |
|
Task Description
Print preview marks drawing as modified
|
|
48 | QCAD (main) | Bug Report | Low | Close drawing from print preview | Closed | |
|
Task Description
Fails if drawing was modified and user wishes to save drawing.
|
|
49 | QCAD (main) | Bug Report | High | Import QCAD 2 drawings | Closed | |
|
Task Description
Load QCAD 2 drawings, including:
print preview settings, drawing scale, etc.
hatch patterns
fix name
fix scale
fix angle
dimension labels (tolerances)
|
|
51 | QCAD (main) | Bug Report | Low | Text Dialog: remember last used settings | Closed | |
|
Task Description
Remember last used settings (text size, font, ...)
|
|
52 | QCAD (main) | Bug Report | Low | Property Editor: combo boxes | Closed | |
|
Task Description
Text entities show a field “Font Name” in the property editor. This should offer a font combo box to change the font.
Hatch entities show a field “Pattern/Name” which should offer a combo box with pattern names.
|
|
53 | QCAD (main) | Bug Report | Low | Text issues | Closed | |
|
Task Description
Done
Text with ‘standard’ font
|
|
56 | QCAD (main) | Bug Report | Low | Courier font collision | Closed | |
|
Task Description
Rename Courier.cxf font, correct courier in imported QCAD 2 files
|
|
58 | QCAD (main) | Bug Report | Low | SVG Export file name suggestion | Closed | |
|
Task Description
Quick SVG Export suggests file name “Untitled 1 [*].svg”
Remove [*] (comes from window title).
|
|
59 | QCAD (main) | Bug Report | Low | nested block inserts | Closed | |
|
Task Description
...display nothing (see auto generated example drawings)
|
|
61 | Documentation | Bug Report | Medium | QCAD 3 Manual | Closed | |
|
Task Description
Change the user manual directory / file names from ‘simpletextviewer’ to ‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown in the help menu.
We can simply drop the contents of the manual that is checked in and replace it with a simple note “No manual is available yet for this technology preview of QCAD 3”
|
|
65 | QCAD (main) | Bug Report | Low | Save as hotkey | Closed | |
|
Task Description
File - Save As has no hotkey under Linux (should be Ctrl-Shift-S)
|
|
66 | QCAD (main) | Bug Report | Low | Warnings to fix | Closed | |
|
Task Description
Fix warning on start: Warning: RGuiAction::getByScriptFile: no action found: “scripts/Snap/Coordinate/Coordinate.js”
|
|
70 | QCAD (main) | Bug Report | Low | 64bit | Closed | |
|
Task Description
ECMAScript engine (garbage collector) crashes on Mac OS X and Linux 64bit if QCAD binary is compiled as a 64bit binary.
|
|
76 | QCAD (main) | Bug Report | Low | PDF Export: add extension | Closed | |
|
Task Description
Add file extension .pdf automatically if omitted by user.
|
|
77 | QCAD (main) | Bug Report | Medium | Linux: Printing crashes | Closed | |
|
Task Description
Printing segfaults under Linux after the printer dialog is shown.
|
|
85 | QCAD (main) | Bug Report | High | QCAD 2 example drawing errors | Closed | |
|
Task Description
Fix QCAD 2 example drawings:
dimension labels with tolerances
hatch pattern scale
|
|
87 | QCAD (main) | Bug Report | Medium | Advanced Selection hits 'debugger' statement | Closed | |
|
Task Description
Advanced selection dialog hits a debugger statement on line 1088.
Selection- Advanced Selection
Change first combo box to “Any”
|
|
88 | QCAD (main) | Bug Report | Low | Duplicate menu | Closed | |
|
Task Description
Block - Explode
|
|
89 | QCAD (main) | Bug Report | Low | Open file from Finder (Mac) | Closed | |
|
Task Description
Double clicking a DWG file in Finder opens QCAD but not the file
|
|
99 | QCAD (main) | Bug Report | Low | Library Browser exception | Closed | |
|
Task Description
Probably just a missing var modTimeTo; ?
Uncaught exception at /users/andrew/data/RibbonSoft/projects/QCAD3/trunk/scripts/Widgets/LibraryBrowser/LibraryBrowser.js:674: ReferenceError: Can't find variable: modTimeTo
674 kwIds, fileTypes, author, license, modTimeFrom, modTimeTo, offset, limit);
|
|
100 | QCAD (main) | Bug Report | Low | Library Browser Search | Closed | |
|
Task Description
Search does not work for all items (e.g. ‘moose’ (no results), ‘man’ (does not find man.svg))
|
|
104 | QCAD (main) | Bug Report | Low | Property Editor: entity type filter not applied to colo ... | Closed | |
|
Task Description
Entity filter is not applied to combo box type properties.
|
|
105 | QCAD (main) | Bug Report | High | Undo after line end point drag'n'drop operation | Closed | |
|
Task Description
Undo undoes end point movement and angle change (angle property should be ignored in undo/redo operations).
|
|
107 | QCAD (main) | Bug Report | Low | Layer names should be case insensitive | Closed | |
|
Task Description
Layer names should be case insensitive
|
|
110 | QCAD (main) | Bug Report | Low | Block list: blocks disappear when showing hatch dialog | Closed | |
|
Task Description
Block list: blocks disappear when showing hatch dialog
|
|
113 | QCAD (main) | Bug Report | Low | Print Preview: page tags | Closed | |
|
Task Description
page tags / page IDs never shown
|
|
139 | QCAD (main) | Bug Report | Low | Linetype / drawing unit | Closed | |
|
Task Description
Line type rendering with drawing unit != mm
|
|
140 | QCAD (main) | Bug Report | Low | Arc rendering with QPainterPath::arcTo not precise enou ... | Closed | |
|
Task Description
Arcs rendered with QPainterPath::arcTo are not precise. Especially the start- / end point offsets are confusing. Differences are up to 0.01 units.
|
|
142 | QCAD (main) | Bug Report | High | Crash when staring QCAD with LibraryBrowser module | Closed | |
|
Task Description
QCAD crashes directly after start (when all plugins have been loaded) with a “Bus Error” or segmentation fault in approximately 90% of all starts with the LibraryBrowser module. Without modules
scripts/Widgets/LibraryBrowser
scripts/Tools/LibraryTranslator
scripts/Developer/BookImages
scripts/Developer/UiTest/LibraryBrowserTest
scripts/Developer/UiTest/LibraryBrowserTest2
no crashes occur.
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 QtGui 0x0349d27b QWidgetPrivate::showChildren(bool) + 235
1 QtGui 0x0349d38b QWidgetPrivate::show_helper() + 107
2 QtGui 0x0349d2b9 QWidgetPrivate::showChildren(bool) + 297
3 QtGui 0x0349d38b QWidgetPrivate::show_helper() + 107
4 QtGui 0x034a13c3 QWidget::setVisible(bool) + 1075
5 QtGui 0x0349fd7a QWidget::qt_metacall(QMetaObject::Call, int, void**) + 1098
6 QtGui 0x03abf6a5 QMainWindow::qt_metacall(QMetaObject::Call, int, void**) + 53
7 com.ribbonsoft.qcad 0x007d31c7 RMainWindowQt::qt_metacall(QMetaObject::Call, int, void**) + 45
8 QtScript 0x05aa79db QScript::callQtMethod(QTJSC::ExecState*, QMetaMethod::MethodType, QObject*, QTJSC::ArgList const&, QMetaObject const*, int, bool) + 11595
9 QtScript 0x05aab60e QScript::QtFunction::execute(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::ArgList const&) + 174
10 QtScript 0x05aab900 QScript::QtFunction::call(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) + 224
11 QtScript 0x059aec41 QTJSC::NativeFuncWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) const + 113
12 QtScript 0x05983e99 cti_op_call_NotJSFunction + 489
13 ??? 0x1a761a65 0 + 443947621
14 QtScript 0x0593b427 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, int, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 1031
15 QtScript 0x0593b721 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 97
16 QtScript 0x05a68cb6 QScriptEnginePrivate::evaluateHelper(QTJSC::ExecState*, long, QTJSC::EvalExecutable*, bool&) + 582
17 QtScript 0x05a69511 QScriptEngine::evaluate(QString const&, QString const&, int) + 801
18 com.ribbonsoft.qcad 0x0003589b RScriptHandlerEcma::eval(QString const&, QString const&) + 57
19 com.ribbonsoft.qcad 0x000357f1 RScriptHandlerEcma::doScript(QString const&, QStringList const&) + 805
20 com.ribbonsoft.qcad 0x00923a19 RScriptHandler::init(QString const&, QStringList const&) + 641
21 com.ribbonsoft.qcad 0x0002d51f main + 2417 (main.cpp:172)
22 com.ribbonsoft.qcad 0x0002c909 _start + 208
23 com.ribbonsoft.qcad 0x0002c838 start + 40
|
|
153 | QCAD (main) | Bug Report | Low | Save triangle shape after exploding dimension | Closed | |
|
Task Description
Save triangle shape after exploding dimension
|
|
155 | QCAD (main) | Bug Report | Low | Copy / paste: convert units | Closed | |
|
Task Description
Copy / paste: convert units
- copy: copy drawing unit to clipboard - paste: convert pasted entities from clipboard unit to drawing unit
|
|
159 | QCAD (main) | Bug Report | Low | Dimension text labels | Closed | |
|
Task Description
“” → default label “.” → no label
|
|
161 | QCAD (main) | Bug Report | Low | Polyline - Equidistant | Closed | |
|
Task Description
No preview, produces invalid polyline
|
|
162 | QCAD (main) | Bug Report | Low | Selection tools: select entities on hidden layers | Closed | |
|
Task Description
Rectangle select selects entities on hidden layers Select all selects entities on hidden layers
|
|
163 | QCAD (main) | Bug Report | Low | Selection with locked layers | Closed | |
|
Task Description
- two lines on top of each other - one line on locked layer - one line on unlocked layer
Selection of the line on unlocked layer should be easily possible.
|
|
164 | QCAD (main) | Bug Report | Low | Hatch / draft mode | Closed | |
|
Task Description
open example01.dxf
toggle draft mode
toggle draft mode
hatch is now visible in draft mode and not visible in normal mode
|
|
165 | QCAD (main) | Bug Report | Low | dimension arrows / draft mode | Closed | |
|
Task Description
dimension arrows not visible in draft mode
|
|
166 | QCAD (main) | Bug Report | Low | break out | Closed | |
|
Task Description
break out for top segment of arc broken
|
|
167 | QCAD (main) | Bug Report | Low | trim: changes layer | Closed | |
|
Task Description
trimmed entity ends up on current layer instead of original
|
|
168 | QCAD (main) | Bug Report | Low | block visibility | Closed | |
|
Task Description
disable for now or implement
|
|
182 | QCAD (main) | Bug Report | Low | check for new version | Closed | |
|
Task Description
Check for new version of QCAD:
Server:
URL which contains current version number as plain text
Client:
|